HYSF 5501-1508-0002 Metal Shell Subsea Bulkhead Connector – 15+8 Hybrid Contact, 6000m Depth, 77mm Length, Variant 0002 (Alternate Gender / Termination)

Plug Color Configuration
Natural 316L stainless steel shell (passivated); black chloroprene rubber insulator face; gold‑plated brass contacts (opposite gender to 0000 variant); nitrile O‑rings; stainless steel mounting nut

Main parameters

• Model code: HYSF 5501‑1508‑0002 (Metal Shell 55 Series, hybrid, variant 0002 – likely female socket version or reverse termination)

• Contact configuration: hybrid – 15 power/signal contacts + 8 coaxial / data contacts (same hybrid layout as 1508 series)

• Gender assumption: likely female socket contacts (if 0000 is male pin version) – verify with catalog

• Depth rating: 6000 meters (19685 ft) – full subsea operation

• Contact resistance: <0.01Ω (power/signal) / <0.015Ω (coaxial)

• Insulation resistance: >200 MΩ

• Electrical specification: 500V @ 6‑10A per power contact; 300V @ 1‑3A for signal

• Transmission rating (data/coaxial): up to 1 Gbit/s

• Temperature rating: -4°C to +60°C (working)

• Paarungszyklen: >500 wet or dry mate

• Mounting style: bulkhead (panel mount) with external thread and mounting nut

• Typical applications: subsea junction boxes, ROV tooling interfaces, underwater hybrid power & data distribution, deep‑sea observatory feedthroughs

Material parameters

• Connector shell: 316L stainless steel (standard); titanium (optional)

• Insulator face: chloroprene rubber (neoprene) – dielectric, hydrostatically stable

• Kontakte: gold‑plated brass (sockets or pins – opposite to 0000)

• Mounting nut, washers & snap ring: 316L stainless steel

• O‑rings: nitrile (NBR) 70 Shore A – seawater compatible

• Rear termination: pigtail leads (0.5m standar, 1 mm² power / 0.5 mm² signal) or PCB pins

Dimension & Thread Specifications

• Overall length (L): 77 mm (from mating face to rear end, excluding pigtail)

• Shell outer diameter (OD): 27.5 mm

• Mounting thread: metric – e.g., M25×1.5 or M27×1.5 (per 55 series standard)

• Panel cutout diameter: approx. 28 mm (recommended tolerance ±0.1 mm)

• Mounting nut torque: 40‑60 Nm (stainless steel, per HYSF torque recommendations)

• Mating pair: compatible with HYSF 55R1‑1508‑0002 or 55xxx‑1508‑xxxx male plug

• All dimensions in mm – 1 inch = 25.4 mm

Key differences from 5501-1508-0000 (SEO differentiation):

• Variant 0002 typically offers reverse gender contacts (sockets instead of pins)

• May include different cable exit orientation or enhanced sealing

• Suitable for panel side requiring female interface for ROV hot‑stab applications

• Intermateable with 0000 version when paired appropriately