Les HYSF SUBSEA MCBH6F 6-Pin Female Bulkhead Underwater Connector<\/strong> is a compact, high-performance, wet-mateable electrical connector designed for reliable power and signal transmission through underwater equipment housings. Engineered for demanding marine environments, the MCBH6F provides a dependable waterproof bulkhead connection solution for ROVs, AUVs, underwater cameras, marine sensors, oceanographic instruments, and offshore engineering systems.<\/p>\n Featuring six female electrical contacts, a marine-grade stainless steel housing, and a compact Micro Circular mating interface, the MCBH6F combines space-saving installation with reliable underwater electrical performance.<\/p>\n The connector is designed for subsea applications up to 6,000 meters (60 MPa)<\/strong> when correctly installed and used in a qualified mating configuration. Its wet-mateable interface allows underwater connection and disconnection when the appropriate operating procedures are followed.<\/p>\n The MCBH6F is specifically designed to mate with corresponding 6-pin male Micro Circular connectors, including the MCIL6M male inline underwater connector<\/strong>.<\/p>\n Manufactured by HYSF SUBSEA<\/strong>, the MCBH6F is also designed for mating compatibility with corresponding MacArtney SubConn and SEACON Micro Circular connector interfaces, making it a practical alternative for underwater equipment manufacturers and subsea system integrators.<\/p>\n The MCBH6F features a miniature circular bulkhead design incorporating six female electrical contacts within a compact housing.<\/p>\n This space-efficient configuration makes it particularly suitable for underwater equipment requiring multiple electrical connections within a limited panel area.<\/p>\n Its compact construction is ideal for small ROVs, autonomous underwater vehicles, marine instrumentation housings, underwater sensor modules, and subsea electronic enclosures.<\/p>\n The six-contact configuration allows multiple suitable electrical circuits to pass through a single bulkhead connection.<\/p>\n The HYSF SUBSEA MCBH6F is designed for compatibility with corresponding SubConn Micro Circular 6-pin male connector interfaces.<\/p>\n This makes it suitable for replacement applications, underwater equipment maintenance, and new subsea electrical system designs using compatible Micro Circular connectors.<\/p>\n The MCBH6F is also designed for use with corresponding SEACON-style Micro Circular interfaces, subject to confirmation of the exact mating configuration.<\/p>\n HYSF SUBSEA is an independent manufacturer of underwater connectors. The MCBH6F is a compatible alternative rather than an original MacArtney SubConn or SEACON-branded product.<\/p>\n The MCBH6F belongs to the HYSF SUBSEA wet-mateable Micro Circular connector series.<\/p>\n Wet-mateable connectors are designed to support mating and unmating in underwater environments when operated according to the specified procedures.<\/p>\n This capability is particularly beneficial for modular subsea equipment, underwater sensor replacement, ROV maintenance, and marine instrumentation applications.<\/p>\n Electrical circuits should be de-energized before mating or unmating unless a specific live-mating procedure and rating have been approved.<\/p>\n The HYSF SUBSEA Micro Circular connector series is designed for underwater applications up to 6,000 meters, equivalent to approximately 60 MPa of hydrostatic pressure.<\/p>\n When correctly mounted on an equipment housing and paired with a compatible male connector, the MCBH6F provides a suitable electrical interface for deepwater applications.<\/p>\n The pressure capability of the complete installation depends on the bulkhead mounting arrangement, sealing system, mating connector, and operating conditions.<\/p>\n The MCBH6F is available with a marine-grade stainless steel housing designed for demanding seawater environments.<\/p>\n Stainless steel construction provides mechanical strength and corrosion resistance, making the connector suitable for underwater equipment exposed to seawater and harsh operating conditions.<\/p>\n The connector also incorporates gold-plated female contacts to support stable electrical performance and help resist contact-surface corrosion.<\/p>\n Alternative housing materials or customized configurations may be reviewed according to project requirements.<\/p>\n The MCBH6F features a threaded bulkhead mounting design suitable for integration into underwater pressure housings, instrument enclosures, and subsea junction boxes.<\/p>\n The standard Micro Circular 2\u20138 pin series uses a 7\/16-20 UNF-2A mounting thread<\/strong>, with installation dimensions defined in the corresponding technical drawing.<\/p>\n The standard bulkhead connector is normally supplied with approximately 0.3 meters of internal wire leads.<\/p>\n Mounting hardware and sealing components should be confirmed against the supplied product configuration and approved installation drawing.<\/p>\n Technical Note:<\/strong> Electrical ratings, sealing performance, mounting dimensions, and pressure capability should be verified against the approved product drawing and installation configuration before ordering.<\/p>\n The MCBH6F is specifically designed for use with compatible 6-pin male Micro Circular underwater connectors.<\/p>\n The HYSF MCIL6M is a male inline underwater cable connector designed to mate with the MCBH6F female bulkhead connector.<\/p>\n When connected, the two components form a detachable electrical interface between an external subsea cable assembly and an equipment-mounted bulkhead connector.<\/p>\n This combination is suitable for underwater applications including:<\/p>\n The standard MCIL6M inline connector is normally supplied with a 1-meter cable, while the MCBH6F bulkhead connector typically includes approximately 0.3 meters of internal wire leads.<\/p>\n Custom cable lengths and wiring configurations can be specified according to project requirements.<\/p>\n The HYSF MCDC6M is a male protective dummy connector designed to mate with compatible 6-pin female Micro Circular interfaces.<\/p>\n When the MCBH6F is not connected to its normal working cable, an appropriate MCDC6M dummy plug helps protect the exposed female connector interface against contamination and mechanical damage.<\/p>\n This is particularly useful during equipment transportation, storage, maintenance, and underwater deployment.<\/p>\n The HYSF SUBSEA MCBH6F is designed for mating compatibility with corresponding MacArtney SubConn Micro Circular 6-pin male connectors.<\/p>\n For mixed-brand installations, customers should verify the mechanical interface, mating dimensions, contact arrangement, and locking sleeve compatibility.<\/p>\n ROVs frequently require multiple waterproof electrical connections between internal electronics and external underwater equipment.<\/p>\n The MCBH6F provides a compact bulkhead interface suitable for sensor circuits, camera systems, control signals, and auxiliary electrical connections.<\/p>\n Its miniature design is especially useful for observation-class ROVs and compact underwater robotic platforms.<\/p>\n AUVs often incorporate navigation systems, environmental sensors, communication equipment, and monitoring instruments within pressure-resistant housings.<\/p>\n The MCBH6F can provide a compact electrical feedthrough for suitable power and signal circuits.<\/p>\n Its six-contact configuration helps reduce the number of separate bulkhead connectors required.<\/p>\n Underwater imaging equipment commonly requires waterproof bulkhead connectors to connect internal electronics with external cables.<\/p>\n The MCBH6F can be installed on compatible underwater camera housings, lighting enclosures, and marine observation systems.<\/p>\n When paired with an MCIL6M male inline connector, it provides a detachable underwater electrical connection.<\/p>\n Oceanographic instruments operate in challenging seawater environments where reliable electrical interfaces are important.<\/p>\n The MCBH6F is suitable for marine research equipment, environmental monitoring instruments, underwater data loggers, and compatible scientific sensor systems.<\/p>\n Its compact size makes it particularly useful for instruments with limited housing space.<\/p>\n Subsea junction boxes distribute electrical power and signals between underwater devices.<\/p>\n The MCBH6F can be used as a panel-mounted electrical interface for compatible external cable assemblies.<\/p>\n This supports modular equipment design and simplifies cable replacement during maintenance.<\/p>\n The MCBH6F is designed for threaded bulkhead installation on suitable underwater equipment housings.<\/p>\n The standard Micro Circular mounting thread is 7\/16-20 UNF-2A<\/strong>.<\/p>\n Before installation, customers should verify the panel thickness, mounting hole dimensions, sealing surface, thread engagement, and required installation hardware.<\/p>\n The correct mounting dimensions should be taken from the approved HYSF SUBSEA technical drawing.<\/p>\n Step 1: Verify the Mounting Dimensions<\/strong><\/p>\n Confirm that the equipment housing is machined according to the specified mounting dimensions and thread requirements.<\/p>\n Step 2: Inspect the Sealing Surface<\/strong><\/p>\n Ensure that the mounting surface is clean, smooth, and free from damage that could affect sealing performance.<\/p>\n Step 3: Install the Bulkhead Connector<\/strong><\/p>\n Position the MCBH6F correctly and secure it using the specified mounting hardware.<\/p>\n Follow the approved installation instructions for sealing components and tightening requirements.<\/p>\n Step 4: Connect the Internal Wire Leads<\/strong><\/p>\n Terminate the internal wires according to the approved electrical wiring diagram.<\/p>\n Confirm pin numbering and conductor assignments before connecting the equipment electronics.<\/p>\n Step 5: Mate the External Connector<\/strong><\/p>\n Connect the compatible MCIL6M male inline connector following the specified cleaning, lubrication, and mating procedures.<\/p>\n Use the appropriate locking sleeve or retention accessory.<\/p>\n Step 6: Perform Inspection and Testing<\/strong><\/p>\n Verify continuity, insulation performance, and sealing integrity according to the equipment’s inspection and testing requirements.<\/p>\n HYSF SUBSEA supports customized underwater connector configurations for OEM and industrial applications.<\/p>\n Depending on project requirements, available options may include:<\/p>\n For equipment requiring special sealing arrangements, nonstandard mounting dimensions, or alternative housing materials, the complete connector configuration should be reviewed before production.<\/p>\n HYSF SUBSEA<\/strong> specializes in manufacturing underwater electrical connectors, subsea cable assemblies, bulkhead connectors, and customized marine interconnection solutions.<\/p>\n Our Micro Circular connector series is designed to support applications requiring compact dimensions, reliable electrical transmission, and high-pressure resistance.<\/p>\n Our capabilities include:<\/p>\n HYSF SUBSEA supports underwater equipment manufacturers, marine research institutions, ROV developers, AUV manufacturers, and subsea engineering companies.<\/p>\n The MCBH6F is a 6-pin female bulkhead underwater electrical connector from the HYSF SUBSEA Micro Circular series.<\/p>\n It is designed for installation on underwater equipment housings to provide a detachable electrical interface between internal electronics and external subsea cables.<\/p>\n Yes. The HYSF SUBSEA MCBH6F is designed for compatibility with corresponding SubConn Micro Circular 6-pin male connector interfaces.<\/p>\n Customers should confirm the exact mating configuration before installation.<\/p>\n The HYSF MCIL6M male inline underwater connector is a compatible mating connector for MCBH6F.<\/p>\n The corresponding protective dummy plug is MCDC6M.<\/p>\n The standard HYSF Micro Circular 6-pin bulkhead connector uses a 7\/16-20 UNF-2A mounting thread.<\/p>\n Customers should verify the installation dimensions using the approved technical drawing.<\/p>\n The standard MCBH6F bulkhead connector is normally supplied with approximately 0.3 meters of internal wire leads.<\/p>\n Custom wire lengths may be available according to project requirements.<\/p>\n The standard HYSF SUBSEA Micro Circular 6-pin series has a nominal current rating of 5 A per contact.<\/p>\n The actual operating current depends on the selected wire size, environmental conditions, and approved electrical configuration.<\/p>\n Yes. The MCBH6F belongs to the HYSF SUBSEA Micro Circular series, designed for applications up to 6,000 meters (60 MPa).<\/p>\n The complete connector and bulkhead installation must be correctly configured and qualified for the intended operating conditions.<\/p>\n Yes. The MCBH6F can be used for suitable communication and low-voltage signal circuits.<\/p>\n However, communication protocols such as Ethernet require appropriate cable construction, wiring arrangements, and system-level verification.<\/p>\n The connector’s six-contact configuration alone does not establish compatibility with a specific communication protocol.<\/p>\n Les HYSF SUBSEA MCBH6F 6-Pin Female Bulkhead Underwater Connector<\/strong> provides a compact and dependable solution for underwater electrical connections through equipment housings.<\/p>\n With its marine-grade stainless steel construction, wet-mateable interface, SubConn-compatible design, and suitability for deepwater applications, the MCBH6F is an excellent choice for ROVs, AUVs, underwater cameras, marine sensors, and oceanographic instrumentation.<\/p>\n Whether used in a standard bulkhead installation or an OEM subsea equipment project, the MCBH6F supports reliable power and signal transmission in demanding marine environments.<\/p>\n HYSF SUBSEA \u2013 Reliable Underwater Connector Solutions for Marine and Subsea Applications.<\/strong><\/p>","protected":false},"excerpt":{"rendered":" Les HYSF SUBSEA MCBH6F<\/strong> is a SubConn-compatible 6-pin female bulkhead underwater connector designed for reliable power and signal transmission through subsea equipment housings.<\/p>\n Featuring a compact Micro Circular interface, marine-grade stainless steel housing, gold-plated contacts, and wet-mateable design, the MCBH6F supports underwater applications up to 6,000 meters (60 MPa).<\/p>\n Compatible with MCIL6M male inline connectors, it is ideal for ROVs, AUVs, underwater cameras, marine sensors, subsea junction boxes, and oceanographic instrumentation.<\/p>\n Key Features:<\/strong><\/p>\nKey Features and Benefits<\/h3>\n
1. Compact 6-Pin Female Bulkhead Design<\/h4>\n
2. SubConn-Compatible Micro Circular Interface<\/h4>\n
3. Wet-Mateable Underwater Connection<\/h4>\n
4. Deepwater Pressure Resistance<\/h4>\n
5. Marine-Grade Stainless Steel Housing<\/h4>\n
6. Reliable Panel-Mount Installation<\/h4>\n
Sp\u00e9cifications techniques<\/h3>\n
\n\n
\n Param\u00e8tres<\/th>\n Specification<\/th>\n<\/tr>\n \n Manufacturer<\/td>\n HYSF SUBSEA<\/td>\n<\/tr>\n \n Model Number<\/td>\n MCBH6F<\/td>\n<\/tr>\n \n Product Type<\/td>\n Underwater Bulkhead Connector<\/td>\n<\/tr>\n \n Connector Series<\/td>\n Micro Circular<\/td>\n<\/tr>\n \n Nombre de contacts<\/td>\n 6-Pin<\/td>\n<\/tr>\n \n Contact Gender<\/td>\n Female<\/td>\n<\/tr>\n \n Compatible Connector Gender<\/td>\n Male<\/td>\n<\/tr>\n \n Compatible Inline Connector<\/td>\n MCIL6M<\/td>\n<\/tr>\n \n Protective Dummy Connector<\/td>\n MCDC6M<\/td>\n<\/tr>\n \n SubConn Compatibility<\/td>\n Micro Circular 6-Pin Male Interface<\/td>\n<\/tr>\n \n Mating Type<\/td>\n Wet-Mateable<\/td>\n<\/tr>\n \n Housing Material<\/td>\n Marine-Grade Stainless Steel<\/td>\n<\/tr>\n \n Contact Material<\/td>\n Gold-Plated Metal Contacts<\/td>\n<\/tr>\n \n Filet de montage<\/td>\n 7\/16-20 UNF-2A<\/td>\n<\/tr>\n \n Standard Bulkhead Wire Length<\/td>\n 0.3 Meter<\/td>\n<\/tr>\n \n Custom Wire Length<\/td>\n Available Upon Request<\/td>\n<\/tr>\n \n Rated Current<\/td>\n 5 A per Contact, Standard Series<\/td>\n<\/tr>\n \n Operating Depth<\/td>\n Up to 6,000 Meters<\/td>\n<\/tr>\n \n Pressure Rating<\/td>\n Up to 60 MPa<\/td>\n<\/tr>\n \n Waterproof Design<\/td>\n IP68, When Correctly Installed and Mated<\/td>\n<\/tr>\n \n Installation Type<\/td>\n Threaded Bulkhead Mount<\/td>\n<\/tr>\n \n Primary Function<\/td>\n Underwater Power and Signal Feedthrough<\/td>\n<\/tr>\n \n Applications typiques<\/td>\n ROV, AUV, Sensors, Cameras, Marine Instrumentation<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n Compatible Underwater Connectors<\/h3>\n
MCIL6M \u2013 6-Pin Male Inline Underwater Connector<\/h4>\n
\n
MCDC6M \u2013 Male Protective Dummy Plug<\/h4>\n
Compatibility with SubConn Micro Circular Connectors<\/h4>\n
Typical Applications of the MCBH6F Underwater Bulkhead Connector<\/h3>\n
1. Remotely Operated Vehicles (ROVs)<\/h4>\n
2. Autonomous Underwater Vehicles (AUVs)<\/h4>\n
3. Underwater Cameras and Lighting Systems<\/h4>\n
4. Oceanographic Research and Marine Monitoring<\/h4>\n
5. Subsea Junction Boxes and Instrumentation<\/h4>\n
Bulkhead Mounting and Installation Requirements<\/h3>\n
Recommended Installation Procedure<\/h4>\n
Customization Options<\/h3>\n
\n
Why Choose HYSF SUBSEA?<\/h3>\n
\n
Frequently Asked Questions (FAQ)<\/h3>\n
Q1: What is the MCBH6F underwater connector?<\/h4>\n
Q2: Is the MCBH6F compatible with SubConn connectors?<\/h4>\n
Q3: Which connector can mate with MCBH6F?<\/h4>\n
Q4: What is the mounting thread of MCBH6F?<\/h4>\n
Q5: What is the standard wire length?<\/h4>\n
Q6: What is the current rating of MCBH6F?<\/h4>\n
Q7: Is the MCBH6F suitable for deepwater applications?<\/h4>\n
Q8: Can the MCBH6F be used for underwater communication signals?<\/h4>\n
MCBH6F 6-Pin Female Bulkhead Underwater Connector by HYSF SUBSEA<\/h3>\n
\n