{"id":9370,"date":"2026-10-25T04:50:41","date_gmt":"2026-10-25T04:50:41","guid":{"rendered":"https:\/\/hysfsubsea.com\/?post_type=product&p=9370"},"modified":"2026-10-25T04:50:41","modified_gmt":"2026-10-25T04:50:41","slug":"dc16m-16-pin-male-dummy-plug-subconn-compatible","status":"publish","type":"product","link":"https:\/\/hysfsubsea.com\/nb\/product\/dc16m-16-pin-male-dummy-plug-subconn-compatible\/","title":{"rendered":"DC16M 16-Pin Male Dummy Plug \u2013 SubConn Compatible Underwater Connector Protection Cap | HYSF SUBSEA"},"content":{"rendered":"

DC16M 16-Pin Male Dummy Plug \u2013 SubConn Compatible Underwater Connector Protection Cap<\/h1>\n

Product Overview<\/h2>\n

Den HYSF SUBSEA DC16M 16-Pin Male Dummy Plug<\/strong> is a protective underwater connector accessory designed to safeguard compatible 16-pin female connector interfaces from seawater contamination, marine sediment, dirt, and accidental mechanical damage.<\/p>\n

As part of the HYSF Standard Circular Connector Series, the DC16M features a sixteen-position male mating interface designed for the corresponding BH16F 16-Pin Female Bulkhead Underwater Connector<\/strong>.<\/p>\n

When an underwater electrical cable is disconnected, the exposed bulkhead interface may become vulnerable to contamination and environmental damage. The DC16M provides a practical protective solution during equipment maintenance, transportation, storage, and approved subsea operating conditions.<\/p>\n

Manufactured with a durable molded neoprene rubber body, the DC16M is designed for reliable connector interface protection in demanding marine environments.<\/p>\n

Its Standard Circular mating configuration is intended for compatibility with corresponding HYSF, SubConn, and SEACON 16-pin female underwater connector interfaces.<\/p>\n

The DC16M is suitable for remotely operated vehicles (ROVs), autonomous underwater vehicles (AUVs), oceanographic instruments, underwater cameras, sonar equipment, marine monitoring systems, and offshore subsea installations.<\/p>\n

The DC16M is a non-electrical protective dummy plug.<\/strong> It does not transmit electrical power, signals, or data and is supplied without an operational electrical cable.<\/p>\n

Key Features and Benefits<\/h2>\n

1. Dedicated 16-Pin Male Protective Interface<\/h3>\n

The DC16M features a sixteen-position male configuration designed to fit compatible Standard Circular female underwater connector interfaces.<\/p>\n

Its primary matching connector is the BH16F 16-Pin Female Bulkhead Underwater Connector<\/strong>.<\/p>\n

During normal electrical operation, the BH16F mates with an IL16M male inline underwater cable connector.<\/p>\n

When the IL16M is removed, the DC16M can be installed to help protect the exposed female bulkhead interface.<\/p>\n

Normal electrical configuration:<\/strong><\/p>\n

BH16F Female Bulkhead + IL16M Male Inline Connector<\/p>\n

Protective configuration:<\/strong><\/p>\n

BH16F Female Bulkhead + DC16M Male Dummy Plug<\/p>\n

This arrangement allows underwater equipment operators to protect disconnected connector interfaces without requiring a functional electrical cable assembly.<\/p>\n

The DC16M is intended for protective use rather than electrical connectivity.<\/p>\n

2. Protection Against Seawater and Marine Contamination<\/h3>\n

Underwater electrical connectors operate in demanding environments where seawater, salt deposits, suspended particles, and marine sediment may be present.<\/p>\n

When the normal mating cable connector is disconnected, the exposed interface can become vulnerable to contamination.<\/p>\n

The DC16M helps protect the connector mating face from direct environmental exposure.<\/p>\n

Potential contaminants include:<\/p>\n

    \n
  • Seawater and salt deposits<\/li>\n
  • Sand and marine sediment<\/li>\n
  • Mud and suspended particles<\/li>\n
  • Dust during equipment storage<\/li>\n
  • Foreign objects introduced during maintenance<\/li>\n
  • Debris encountered during offshore handling<\/li>\n<\/ul>\n

    Using a compatible underwater dummy plug helps maintain the cleanliness and physical condition of the connector interface.<\/p>\n

    This is particularly important for subsea equipment requiring repeated deployment, retrieval, inspection, and maintenance.<\/p>\n

    The actual environmental sealing performance depends on the correct connector combination, proper installation, and applicable qualification of the complete assembly.<\/p>\n

    3. Durable Molded Neoprene Rubber Construction<\/h3>\n

    The standard DC16M features a molded neoprene rubber construction suitable for underwater connector protection.<\/p>\n

    Neoprene rubber is commonly used in marine connection systems because of its flexibility, mechanical resilience, and suitability for seawater-exposed environments.<\/p>\n

    The molded structure provides a protective interface designed to cover the corresponding female connector face.<\/p>\n

    Key advantages include:<\/p>\n

      \n
    • Flexible rubber construction<\/li>\n
    • Mechanical durability<\/li>\n
    • Protection of the mating interface<\/li>\n
    • Suitability for marine environments<\/li>\n
    • Convenient installation and removal<\/li>\n
    • Resistance to ordinary handling wear<\/li>\n<\/ul>\n

      The elastomeric body should be inspected regularly for cracks, cuts, deformation, and other visible damage.<\/p>\n

      A damaged dummy plug should not be installed on a sensitive underwater connector interface.<\/p>\n

      4. SubConn and SEACON Compatible Standard Circular Design<\/h3>\n

      The DC16M belongs to the HYSF Standard Circular underwater connector family.<\/p>\n

      This product family is designed for mating compatibility with corresponding SubConn and SEACON Standard Circular configurations.<\/p>\n

      The DC16M can be considered for protecting compatible sixteen-position female interfaces in existing subsea equipment.<\/p>\n

      Potential applications include:<\/p>\n

        \n
      • Replacement underwater dummy plugs<\/li>\n
      • ROV electrical connector maintenance<\/li>\n
      • Offshore equipment servicing<\/li>\n
      • Marine instrument storage<\/li>\n
      • Underwater connector protection<\/li>\n
      • OEM subsea equipment integration<\/li>\n<\/ul>\n

        Before selecting a replacement protective plug, the exact connector series, contact configuration, gender, and mating dimensions should be verified.<\/p>\n

        Important:<\/strong> DC16M is different from MCDC16M.<\/p>\n

        The DC16M belongs to the Standard Circular Series, while the MCDC16M belongs to the Micro Circular Series.<\/p>\n

        Although both products have sixteen-position male configurations, their mechanical interfaces are different and they are not interchangeable.<\/p>\n

        5. Protection During Equipment Maintenance<\/h3>\n

        Underwater equipment frequently requires external electrical cable assemblies to be disconnected during servicing.<\/p>\n

        Examples include:<\/p>\n

          \n
        • Sensor replacement<\/li>\n
        • Cable inspection<\/li>\n
        • ROV maintenance<\/li>\n
        • Subsea equipment calibration<\/li>\n
        • Instrument testing<\/li>\n
        • Underwater system modification<\/li>\n
        • Offshore equipment preparation<\/li>\n<\/ul>\n

          During these operations, unused connector interfaces may remain exposed.<\/p>\n

          The DC16M can be fitted to compatible female connectors when the operational cable is disconnected.<\/p>\n

          This helps reduce unnecessary environmental exposure and accidental mechanical contact.<\/p>\n

          Including matching protective dummy plugs in a subsea equipment maintenance kit can support more consistent connector handling procedures.<\/p>\n

          6. Suitable for Deep-Sea Connector Systems<\/h3>\n

          The DC16M is designed as a protective accessory for the HYSF Standard Circular underwater connector family.<\/p>\n

          The corresponding Standard Circular electrical connector series includes configurations designed for operating depths of up to 6,000 meters.<\/p>\n

          However, a protective dummy plug should not automatically be assigned the same independent pressure rating as a fully qualified operational electrical connector.<\/p>\n

          The pressure capability of the complete dummy-plugged connector assembly depends on the specific mating configuration, sealing arrangement, installation condition, and applicable testing.<\/p>\n

          For applications requiring underwater deployment with the DC16M installed, the complete protective assembly should be verified against the intended operating depth and pressure.<\/p>\n

          7. Convenient Installation and Removal<\/h3>\n

          The DC16M provides a practical method of protecting compatible female connector interfaces without requiring electrical wiring or cable termination.<\/p>\n

          It can be installed when the operational cable connector has been disconnected.<\/p>\n

          Before installation, the female connector interface should be checked for contamination, mechanical damage, or abnormal wear.<\/p>\n

          The DC16M should be aligned and installed according to the approved mating and retention procedure.<\/p>\n

          Avoid excessive force or tools that may damage the rubber body or connector interface.<\/p>\n

          Correct installation helps maintain the protective function of the dummy plug.<\/p>\n

          DC16M Technical Specifications<\/h2>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
          Parameter<\/th>\nSpesifikasjon<\/th>\n<\/tr>\n
          Brand<\/td>\nHYSF SUBSEA<\/td>\n<\/tr>\n
          Model Number<\/td>\nDC16M<\/td>\n<\/tr>\n
          Produktserie<\/td>\nStandard Circular<\/td>\n<\/tr>\n
          Product Type<\/td>\nMale Dummy Plug<\/td>\n<\/tr>\n
          Interface Configuration<\/td>\n16-Position Male<\/td>\n<\/tr>\n
          Standard Body Material<\/td>\nMolded Neoprene Rubber<\/td>\n<\/tr>\n
          Primary Function<\/td>\nUnderwater Connector Interface Protection<\/td>\n<\/tr>\n
          Compatible Bulkhead Connector<\/td>\nBH16F<\/td>\n<\/tr>\n
          Corresponding Electrical Inline Connector<\/td>\nIL16M<\/td>\n<\/tr>\n
          Compatibility<\/td>\nCorresponding SubConn and SEACON Standard Circular Interfaces<\/td>\n<\/tr>\n
          Electrical Power Transmission<\/td>\nNot Intended<\/td>\n<\/tr>\n
          Signal Transmission<\/td>\nNot Intended<\/td>\n<\/tr>\n
          Functional Electrical Cable<\/td>\nNone<\/td>\n<\/tr>\n
          Internal Wire Leads<\/td>\nNone<\/td>\n<\/tr>\n
          Panel Mounting Thread<\/td>\nNot Applicable<\/td>\n<\/tr>\n
          Operating Environment<\/td>\nMarine and Subsea<\/td>\n<\/tr>\n
          Pressure Suitability<\/td>\nSubject to Complete Assembly Qualification<\/td>\n<\/tr>\n
          Customization<\/td>\nSubject to Project Requirements<\/td>\n<\/tr>\n
          Warranty<\/td>\n12 Months<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

          Technical Note:<\/strong> DC16M is a non-electrical protective accessory. Voltage ratings, current ratings, cable lengths, and bulkhead mounting threads associated with operational underwater connectors should not be interpreted as functional specifications of the DC16M itself.<\/p>\n

          What Is a 16-Pin Underwater Dummy Plug?<\/h2>\n

          A 16-pin underwater dummy plug is a protective accessory designed to cover the mating interface of a compatible sixteen-contact underwater connector when the functional electrical cable is disconnected.<\/p>\n

          Subsea equipment frequently uses multi-contact bulkhead connectors to transmit power, signals, and control information between internal electronics and external underwater devices.<\/p>\n

          During normal operation, these bulkhead connectors are connected to corresponding electrical cable assemblies.<\/p>\n

          However, cables may need to be removed for inspection, replacement, equipment maintenance, or transportation.<\/p>\n

          When a cable is disconnected, the connector interface may remain exposed to seawater, contamination, or accidental contact.<\/p>\n

          The DC16M provides a corresponding male protective interface for compatible female Standard Circular underwater connectors.<\/p>\n

          For example, an underwater electronic housing equipped with a BH16F female bulkhead connector normally uses an IL16M male inline connector for electrical operation.<\/p>\n

          When the IL16M cable is disconnected, the DC16M can be installed to help protect the female bulkhead interface.<\/p>\n

          The dummy plug does not create a working electrical connection.<\/p>\n

          Its purpose is to provide environmental and mechanical protection.<\/p>\n

          DC16M Compatible Connectors and Accessories<\/h2>\n

          BH16F \u2013 16-Pin Female Bulkhead Connector<\/h3>\n

          Den BH16F<\/strong> is the primary matching bulkhead connector for the DC16M.<\/p>\n

          It features sixteen female electrical contacts and is designed for installation through underwater equipment housings.<\/p>\n

          The BH16F belongs to the HYSF Standard Circular 12\/16\/25 Pin family.<\/p>\n

          Its corresponding standard bulkhead configuration uses a 3\/4-16 UNF-2A installation thread.<\/p>\n

          When the operational IL16M electrical cable connector is disconnected, the DC16M can help protect the exposed BH16F female interface.<\/p>\n

          IL16M \u2013 16-Pin Male Inline Underwater Connector<\/h3>\n

          Den IL16M<\/strong> is the functional male inline electrical connector designed to mate with the BH16F female bulkhead.<\/p>\n

          Unlike the DC16M, the IL16M is equipped with an underwater electrical cable.<\/p>\n

          It provides functional electrical connections for appropriate power, control, and instrumentation circuits.<\/p>\n

          The DC16M and IL16M have different functions.<\/p>\n

          The IL16M provides operational electrical connectivity, while the DC16M provides protective coverage.<\/p>\n

          DC16F \u2013 16-Pin Female Dummy Plug<\/h3>\n

          Den DC16F<\/strong> is the opposite-gender protective dummy plug within the same Standard Circular 16-pin family.<\/p>\n

          The DC16F is designed to protect compatible male connector interfaces, particularly the BH16M male bulkhead.<\/p>\n\n\n\n\n\n
          Model<\/th>\nProduct Description<\/th>\nPrimary Matching Bulkhead<\/th>\n<\/tr>\n
          DC16M<\/td>\n16-Pin Male Dummy Plug<\/td>\nBH16F Female Bulkhead<\/td>\n<\/tr>\n
          DC16F<\/td>\n16-Pin Female Dummy Plug<\/td>\nBH16M Male Bulkhead<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

          The correct dummy plug should be selected according to the exposed connector gender and mechanical interface.<\/p>\n

          DC16M vs. MCDC16M<\/h2>\n

          Although the DC16M and MCDC16M are both sixteen-position male dummy plugs, they belong to different HYSF connector families.<\/p>\n

          DC16M \u2013 Standard Circular Series<\/h3>\n
            \n
          • Standard Circular connector interface<\/li>\n
          • Sixteen-position male protective configuration<\/li>\n
          • Primarily designed for BH16F<\/li>\n
          • Used with compatible Standard Circular female connectors<\/li>\n<\/ul>\n

            MCDC16M \u2013 Micro Circular Series<\/h3>\n
              \n
            • Micro Circular connector interface<\/li>\n
            • Sixteen-position male protective configuration<\/li>\n
            • Designed for compatible Micro Circular female connectors<\/li>\n
            • Smaller physical interface than the Standard Circular family<\/li>\n<\/ul>\n

              These two products are not interchangeable.<\/p>\n

              Correct identification of the connector series is essential for avoiding mechanical incompatibility.<\/p>\n

              Typical Applications of DC16M Dummy Plugs<\/h2>\n

              Remotely Operated Vehicles (ROVs)<\/h3>\n

              ROVs use multiple underwater electrical connectors for sensors, cameras, lights, thrusters, and auxiliary equipment.<\/p>\n

              During equipment maintenance, the DC16M can help protect compatible BH16F female bulkhead connectors when the external electrical cable is disconnected.<\/p>\n

              Autonomous Underwater Vehicles (AUVs)<\/h3>\n

              AUV systems frequently include modular instruments and detachable external cable assemblies.<\/p>\n

              The DC16M provides a protective accessory for suitable Standard Circular sixteen-position female interfaces.<\/p>\n

              Underwater Cameras and Imaging Equipment<\/h3>\n

              Subsea imaging systems may require removable cable connections for power, control, and auxiliary equipment.<\/p>\n

              The DC16M can help protect compatible female bulkhead interfaces during camera maintenance, transportation, or storage.<\/p>\n

              Sonar and Hydrophone Systems<\/h3>\n

              Sonar systems and underwater acoustic instruments often incorporate multi-contact underwater electrical connectors.<\/p>\n

              Protective dummy plugs help reduce contamination of unused mating interfaces during inspection and servicing.<\/p>\n

              Oceanographic Instruments<\/h3>\n

              Marine research equipment may undergo repeated deployment and retrieval cycles.<\/p>\n

              The DC16M can be used to protect compatible connector interfaces on oceanographic sensors, scientific instruments, and underwater data acquisition systems.<\/p>\n

              Offshore Monitoring Equipment<\/h3>\n

              Offshore installations frequently operate in demanding seawater environments.<\/p>\n

              The DC16M provides a practical protective accessory for compatible female connectors during cable disconnection and maintenance.<\/p>\n

              Marine Equipment Storage<\/h3>\n

              Underwater equipment may remain in storage between deployments.<\/p>\n

              Using appropriate protective dummy plugs helps keep disconnected connector interfaces covered during these periods.<\/p>\n

              DC16M Installation Guidelines<\/h2>\n

              Step 1: Confirm Connector Compatibility<\/h3>\n

              Verify that the connector being protected is a compatible Standard Circular 16-pin female interface.<\/p>\n

              The primary corresponding HYSF model is BH16F.<\/p>\n

              Step 2: Disconnect Electrical Power<\/h3>\n

              Before removing the operational cable connector, isolate the associated electrical circuits.<\/p>\n

              A protective dummy plug should not be used as a device for terminating an energized electrical connection.<\/p>\n

              Step 3: Inspect the Female Connector Interface<\/h3>\n

              Check the exposed female connector for:<\/p>\n

                \n
              • Sand and sediment<\/li>\n
              • Salt deposits<\/li>\n
              • Dirt and foreign particles<\/li>\n
              • Mechanical damage<\/li>\n
              • Deformation<\/li>\n
              • Deteriorated sealing surfaces<\/li>\n<\/ul>\n

                Clean the connector using the approved maintenance procedure.<\/p>\n

                Step 4: Inspect the DC16M<\/h3>\n

                Examine the molded rubber body for cracks, cuts, deformation, or excessive wear.<\/p>\n

                Do not use a damaged protective plug.<\/p>\n

                Step 5: Align the Connector Interfaces<\/h3>\n

                Align the DC16M with the compatible female connector.<\/p>\n

                Ensure the mating orientation is correct.<\/p>\n

                Never force an incompatible dummy plug into the connector interface.<\/p>\n

                Step 6: Complete Installation<\/h3>\n

                Install the DC16M according to the appropriate mating and retention procedure.<\/p>\n

                Ensure that the protective interface is correctly seated.<\/p>\n

                Step 7: Verify Before Deployment<\/h3>\n

                Before underwater operation, confirm that the complete dummy-plugged connector arrangement is suitable for the intended environmental and pressure conditions.<\/p>\n

                Maintenance and Storage Recommendations<\/h2>\n

                Clean After Seawater Exposure<\/h3>\n

                Inspect the dummy plug after marine use.<\/p>\n

                When appropriate, rinse it with fresh water and allow it to dry before storage.<\/p>\n

                Avoid Sharp Tools<\/h3>\n

                Do not use sharp metal tools to remove the protective plug.<\/p>\n

                Improper removal may damage the molded rubber or connector interface.<\/p>\n

                Inspect the Rubber Body<\/h3>\n

                Check periodically for cracks, cuts, surface deformation, and material deterioration.<\/p>\n

                Replace the plug if it can no longer provide the intended protective function.<\/p>\n

                Store in a Clean Environment<\/h3>\n

                Store unused dummy plugs in a clean, dry location away from excessive heat, aggressive chemicals, and mechanical stress.<\/p>\n

                Maintain Spare Protective Accessories<\/h3>\n

                Keeping spare DC16M dummy plugs available can help protect disconnected underwater connector interfaces during scheduled maintenance.<\/p>\n

                Quality Control and Reliability<\/h2>\n

                HYSF SUBSEA manufactures underwater electrical connectors and associated protective accessories for marine and subsea applications.<\/p>\n

                Quality verification for protective dummy plugs may include:<\/p>\n

                  \n
                • Visual inspection<\/li>\n
                • Dimensional inspection<\/li>\n
                • Material condition checks<\/li>\n
                • Mating compatibility verification<\/li>\n
                • Fit and retention inspection<\/li>\n
                • Sealing evaluation where specified<\/li>\n<\/ul>\n

                  HYSF SUBSEA also maintains testing capabilities for underwater connector assemblies, including hydrostatic pressure testing, electrical continuity testing, insulation resistance testing, and dielectric withstand testing.<\/p>\n

                  Because the DC16M is a non-electrical protective accessory, operating current and electrical continuity are not its functional performance parameters.<\/p>\n

                  The appropriate tests should be selected according to the intended application and complete connector assembly.<\/p>\n

                  Frequently Asked Questions<\/h2>\n

                  Q1: What is the DC16M underwater connector?<\/h3>\n

                  The DC16M is a Standard Circular 16-pin male dummy plug designed to protect compatible female underwater connector interfaces when their operational cables are disconnected.<\/p>\n

                  Q2: Which connector is compatible with DC16M?<\/h3>\n

                  The primary matching HYSF connector is BH16F<\/strong>, the Standard Circular 16-pin female bulkhead underwater connector.<\/p>\n

                  Q3: Is DC16M compatible with SubConn?<\/h3>\n

                  The DC16M belongs to the HYSF Standard Circular connector family, which is designed for compatibility with corresponding SubConn interfaces.<\/p>\n

                  Exact compatibility should be verified against the mating connector model.<\/p>\n

                  Q4: Does DC16M transmit electrical power?<\/h3>\n

                  No. The DC16M is a non-electrical protective accessory.<\/p>\n

                  It does not transmit power, signals, or data.<\/p>\n

                  Q5: Does DC16M come with an underwater cable?<\/h3>\n

                  No. The standard DC16M is supplied without a functional electrical cable.<\/p>\n

                  Q6: What material is used for DC16M?<\/h3>\n

                  The standard body material is molded neoprene rubber.<\/p>\n

                  Q7: What is the difference between DC16M and DC16F?<\/h3>\n

                  DC16M is a male dummy plug designed for compatible female connector interfaces such as BH16F.<\/p>\n

                  DC16F is a female dummy plug designed for compatible male connector interfaces such as BH16M.<\/p>\n

                  Q8: Can DC16M replace IL16M?<\/h3>\n

                  No. IL16M is a functional electrical cable connector, while DC16M is a protective dummy plug.<\/p>\n

                  Q9: Is DC16M the same as MCDC16M?<\/h3>\n

                  No. DC16M belongs to the Standard Circular Series, while MCDC16M belongs to the Micro Circular Series.<\/p>\n

                  Their mechanical interfaces are different.<\/p>\n

                  Q10: Does DC16M have a bulkhead mounting thread?<\/h3>\n

                  No. DC16M is not a panel-mounted bulkhead connector.<\/p>\n

                  The corresponding BH16F bulkhead uses a 3\/4-16 UNF-2A mounting thread.<\/p>\n

                  Q11: Can DC16M be used underwater?<\/h3>\n

                  The DC16M is intended for subsea connector protection.<\/p>\n

                  However, its suitability for specific underwater pressure conditions must be verified for the complete dummy-plugged connector assembly.<\/p>\n

                  Q12: Can DC16M be reused?<\/h3>\n

                  The DC16M can be reused when it remains undamaged and continues to meet the applicable mating and protection requirements.<\/p>\n

                  Inspect the plug before each installation.<\/p>\n

                  Q13: Is DC16M an electrical shorting plug?<\/h3>\n

                  No. The standard DC16M is a protective dummy plug and is not intended to create an electrical shorting connection.<\/p>\n

                  Special shorting configurations must be specified separately.<\/p>\n

                  Q14: When should DC16M be installed?<\/h3>\n

                  The DC16M can be installed when a compatible female underwater connector is disconnected during maintenance, equipment storage, transportation, or other approved operating conditions.<\/p>\n

                  Why Choose HYSF SUBSEA DC16M?<\/h2>\n

                  Den HYSF SUBSEA DC16M 16-Pin Male Dummy Plug<\/strong> provides a practical protective solution for compatible Standard Circular female underwater connector interfaces.<\/p>\n

                  Its principal advantages include:<\/p>\n

                    \n
                  • Dedicated sixteen-position male protective configuration<\/li>\n
                  • Compatibility with corresponding Standard Circular female interfaces<\/li>\n
                  • Primary matching connector: BH16F<\/li>\n
                  • Molded neoprene rubber construction<\/li>\n
                  • Protection against marine contamination<\/li>\n
                  • No functional electrical cable required<\/li>\n
                  • Convenient installation and removal<\/li>\n
                  • Suitable for underwater equipment maintenance<\/li>\n
                  • Useful for marine equipment storage and transportation<\/li>\n
                  • Applicable to ROVs, AUVs, marine sensors, and offshore equipment<\/li>\n
                  • 12-month product warranty<\/li>\n<\/ul>\n

                    For subsea equipment manufacturers, underwater robotics operators, offshore engineering teams, and oceanographic research institutions, the DC16M provides a convenient accessory for protecting disconnected underwater electrical interfaces.<\/p>\n

                    Den DC16M 16-Pin Male Dummy Plug<\/strong> is an important component of the HYSF SUBSEA Standard Circular protective accessory range, helping maintain connector condition during equipment maintenance, handling, and storage.<\/p>","protected":false},"excerpt":{"rendered":"

                    Den HYSF SUBSEA DC16M 16-Pin Male Dummy Plug<\/strong> is a durable underwater connector protection accessory designed to safeguard compatible Standard Circular female connector interfaces from seawater contamination, marine sediment, salt deposits, dirt, and accidental mechanical damage.<\/p>\n

                    As part of the SubConn-compatible HYSF Standard Circular Series<\/strong>, the DC16M features a sixteen-position male mating interface designed primarily for the BH16F 16-Pin Female Bulkhead Underwater Connector<\/strong>.<\/p>\n

                    The standard DC16M uses a molded neoprene rubber body, providing protective coverage for the connector interface during equipment maintenance, storage, transportation, and approved subsea operations.<\/p>\n

                    When the functional IL16M male inline cable connector is disconnected from the BH16F bulkhead, the DC16M can be installed to help protect the exposed female mating interface.<\/p>\n

                    Unlike an operational electrical connector, the DC16M is a non-electrical protective dummy plug<\/strong>. It does not transmit electrical power, data, or signals and is supplied without an attached cable.<\/p>\n

                    Viktige spesifikasjoner<\/h3>\n
                      \n
                    • Model:<\/strong> DC16M<\/li>\n
                    • Brand:<\/strong> HYSF SUBSEA<\/li>\n
                    • Connector Type:<\/strong> 16-Pin Male Dummy Plug<\/li>\n
                    • Series:<\/strong> Standard Circular<\/li>\n
                    • Interface Configuration:<\/strong> 16-Position Male<\/li>\n
                    • Body Material:<\/strong> Molded Neoprene Rubber<\/li>\n
                    • Primary Function:<\/strong> Underwater Connector Interface Protection<\/li>\n
                    • Compatible Bulkhead:<\/strong> BH16F Female Bulkhead<\/li>\n
                    • Corresponding Electrical Cable Connector:<\/strong> IL16M<\/li>\n
                    • Compatibility:<\/strong> Corresponding SubConn and SEACON Standard Circular Interfaces<\/li>\n
                    • Electrical Transmission:<\/strong> Not Intended<\/li>\n
                    • Attached Cable:<\/strong> None<\/li>\n
                    • Bulkhead Mounting Thread:<\/strong> Not Applicable<\/li>\n
                    • Pressure Suitability:<\/strong> Subject to Complete Assembly Qualification<\/li>\n
                    • Warranty:<\/strong> 12 Months<\/li>\n<\/ul>\n

                      Typiske bruksomr\u00e5der<\/h3>\n

                      The DC16M is suitable for protecting compatible female underwater connector interfaces used in:<\/p>\n

                        \n
                      • Remotely Operated Vehicles (ROVs)<\/li>\n
                      • Autonomous Underwater Vehicles (AUVs)<\/li>\n
                      • Oceanographic Research Instruments<\/li>\n
                      • Underwater Cameras and Imaging Systems<\/li>\n
                      • Sonar and Hydrophone Equipment<\/li>\n
                      • Marine Environmental Monitoring Systems<\/li>\n
                      • Offshore Inspection Equipment<\/li>\n
                      • Subsea Electronic Control Modules<\/li>\n
                      • Underwater Junction Boxes<\/li>\n
                      • Marine Equipment Storage and Maintenance<\/li>\n<\/ul>\n

                        Reliable Underwater Connector Protection<\/h3>\n

                        The DC16M provides a convenient protective solution when compatible electrical cable assemblies are disconnected.<\/p>\n

                        Its molded neoprene rubber construction helps reduce direct exposure of female connector interfaces to seawater contamination, sediment, and accidental mechanical contact.<\/p>\n

                        The DC16M can be included as part of a complete subsea connector system alongside the BH16F female bulkhead connector and IL16M male inline cable connector.<\/p>\n

                        Important:<\/strong> DC16M belongs to the Standard Circular Series and is different from MCDC16M of the Micro Circular Series. These products use different mating interfaces and are not interchangeable.<\/p>\n

                        For underwater deployment, the sealing and pressure capability of the complete dummy-plugged assembly should be verified against the intended operating conditions.<\/p>","protected":false},"featured_media":9315,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_acf_changed":false},"product_brand":[30],"product_cat":[32],"product_tag":[],"class_list":["post-9370","product","type-product","status-publish","has-post-thumbnail","product_brand-hysf","product_cat-standard-circular-connectors","first","instock","shipping-taxable","product-type-simple"],"acf":[],"_links":{"self":[{"href":"https:\/\/hysfsubsea.com\/nb\/wp-json\/wp\/v2\/product\/9370","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/hysfsubsea.com\/nb\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/hysfsubsea.com\/nb\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/hysfsubsea.com\/nb\/wp-json\/wp\/v2\/comments?post=9370"}],"version-history":[{"count":1,"href":"https:\/\/hysfsubsea.com\/nb\/wp-json\/wp\/v2\/product\/9370\/revisions"}],"predecessor-version":[{"id":9371,"href":"https:\/\/hysfsubsea.com\/nb\/wp-json\/wp\/v2\/product\/9370\/revisions\/9371"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/hysfsubsea.com\/nb\/wp-json\/wp\/v2\/media\/9315"}],"wp:attachment":[{"href":"https:\/\/hysfsubsea.com\/nb\/wp-json\/wp\/v2\/media?parent=9370"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/hysfsubsea.com\/nb\/wp-json\/wp\/v2\/product_brand?post=9370"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/hysfsubsea.com\/nb\/wp-json\/wp\/v2\/product_cat?post=9370"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/hysfsubsea.com\/nb\/wp-json\/wp\/v2\/product_tag?post=9370"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}