Quick Answer
Common issues and solutions: (1) Intermittent connection – check for corrosion or loose contacts, (2) Leakage – inspect O-rings and torque, (3) High resistance – clean contacts and re-terminate, (4) Physical damage – replace connector. Always disconnect power before troubleshooting.
Troubleshooting Guide
| Problem | Possible Cause | Solution |
|---|---|---|
| Intermittent signal | Corroded contacts | Clean or replace contacts |
| Water leakage | Damaged O-ring | Replace O-ring, re-torque |
| High resistance | Loose termination | Re-terminate connections |
| Short circuit | Water ingress | Dry, inspect, replace if needed |
Contact Us
Technical support: tech@hysfsubsea.com
English
Spanish
Russian
French
German
Korean
Japanese
Arabic
Thai
Danish
Norwegian
