Aller au contenu
Réponse rapide
Yes! HYSF underwater connectors are specifically designed for ROV thruster applications. Our connectors handle high current (up to 50A), provide reliable waterproof seals at operating depths (100-3000m), and are compatible with major thruster brands including Blue Robotics, T200, T500, and custom thruster systems. We offer both wet mate and dry mate options depending on your thruster configuration.
ROV Thruster Connector Requirements
Electrical Specifications
- Current rating: 10A to 50A per contact (depending on thruster power)
- Voltage rating: Typically 12-48V DC for small ROVs, up to 600V for work-class
- Contact resistance: <10 mΩ for efficient power transmission
- Insulation resistance: >1000 MΩ at rated depth
Environmental Requirements
- Depth rating: Match or exceed ROV maximum operating depth
- Pressure cycling: Withstand repeated dive cycles
- Corrosion resistance: Saltwater compatible materials
- Temperature range: -5°C to +40°C typical
Mechanical Requirements
- Vibration resistance: Secure connection under thruster vibration
- Strain relief: Cable management for moving thrusters
- Keying: Prevent mis-mating in low visibility
- ROV operable: Suitable for manipulator handling (wet mate)
HYSF Connector Solutions for ROV Thrusters
Small ROV Thrusters (T200, T500 class)
| Model | Pin Count | Actuel | Depth | Type |
|---|---|---|---|---|
| HYSF-ROV-3P | 3 | 20A | 300m | Dry mate |
| HYSF-ROV-4P | 4 | 20A | 300m | Dry mate |
| HYSF-ROV-5P | 5 | 15A | 300m | Dry mate |
Applications: BlueROV2, custom small ROVs, observation class ROVs
Medium ROV Thrusters
| Model | Pin Count | Actuel | Depth | Type |
|---|---|---|---|---|
| HYSF-ROV-M4 | 4 | 40A | 1000m | Dry mate |
| HYSF-ROV-M5 | 5 | 30A | 1000m | Dry mate |
| HYSF-ROV-M6 | 6 | 25A | 1000m | Dry mate |
Applications: Work-class ROV auxiliary thrusters, inspection ROVs
High-Power Thrusters
| Model | Pin Count | Actuel | Depth | Type |
|---|---|---|---|---|
| HYSF-ROV-H4 | 4 | 50A | 2000m | Dry mate |
| HYSF-ROV-H5 | 5 | 50A | 2000m | Dry mate |
| HYSF-ROV-H6 | 6 | 40A | 2000m | Dry mate |
Applications: Main propulsion thrusters, high-power work-class ROVs
Wiring Configurations
3-Pin (3-Phase Brushless)
- Pin 1: Phase U
- Pin 2: Phase V
- Pin 3: Phase W
- Common for: Small brushless thrusters
4-Pin (3-Phase + Ground)
- Pin 1: Phase U
- Pin 2: Phase V
- Pin 3: Phase W
- Pin 4: Ground/Shield
- Common for: Standard ROV thrusters
5-Pin (3-Phase + Ground + Signal)
- Pin 1-3: Power phases
- Pin 4: Ground
- Pin 5: Temperature sensor or tachometer
- Common for: Smart thrusters with feedback
6-Pin (Dual Motor or 3-Phase + 2 Signals)
- Option A: Two independent 3-pin circuits
- Option B: 3-phase power + 2 signal channels
- Common for: Vector thrusters, azimuthing units
Installation Guidelines
Connector Mounting
- Mount connector on thruster housing using provided hardware
- Apply thread locker to mounting screws
- Ensure O-ring is properly seated and lubricated
- Torque to specification (typically 2-3 Nm for M3, 5-7 Nm for M5)
Cable Termination
- Strip cable to correct length per connector instructions
- Solder or crimp contacts to cable conductors
- Heat-shrink each connection for insulation
- Assemble connector per manufacturer instructions
- Pot with epoxy if required for depth rating
Testing Before Deployment
- Visual inspection of all connections
- Continuity test for each pin
- Insulation resistance test (>100 MΩ)
- Low-pressure test in water tank (if available)
- Document test results
Compatibility
Compatible Thruster Brands
- Blue Robotics (T200, T500, M100, M200, M500)
- VideoRay
- Oceanbotics
- Subsea 7
- Custom thruster systems
Integration Support
- Custom cable assemblies available
- Wiring diagrams provided
- Technical support for integration questions
- Sample program for evaluation
Nous contacter
ROV thruster applications: [email protected]
Support technique : [email protected]
Quote request: [email protected]
