빠른 답변: HYSF MCIL 10-pin underwater connectors (MCIL10M male and MCIL10F female) are inline cable-to-cable connectors designed for multi-channel subsea applications. Featuring 5/8″-18 UNF thread, 10 gold-plated contacts, stainless steel housing, and depth ratings up to 3000m. Ideal for ROV systems, underwater sensors, and marine instrumentation. Standard delivery is 5-7 days for 100-piece orders.
자세한 설명
The MCIL series is HYSF’s premium inline underwater connector family, designed for reliable cable-to-cable connections in demanding marine environments. The 10-pin configuration (MCIL10M/MCIL10F) offers an optimal balance of pin count, size, and current capacity for complex subsea systems.
MCIL10 Series Specifications
| 사양 | MCIL10M (Male) | MCIL10F (Female) |
|---|---|---|
| 핀 수 | 10 pins (gold-plated brass contacts) | |
| Thread Size | 5/8″-18 UNF-2A | |
| 전류 등급 | 5A per contact (continuous) | |
| 전압 등급 | Up to 400V | |
| 절연 저항 | ≥1000 MΩ @ 500V DC | |
| 접촉 저항 | ≤10mΩ | |
| 깊이 등급 | 100m, 300m, 1000m, 3000m (standard) | |
| 하우징 재료 | 316L Stainless Steel (standard), Titanium (optional) | |
| 씰링 | Double O-ring (Viton standard) | |
| 온도 범위 | -40°C ~ +85°C | |
| 케이블 입력 | 6-12mm OD | 6-12mm OD |
| 해지 | Solder cup or crimp | Solder cup or crimp |
MCIL Series vs MCBH Series
Understanding the difference between MCIL (inline) and MCBH (bulkhead) connectors:
| 기능 | MCIL (Inline) | MCBH (Bulkhead) |
|---|---|---|
| Mounting Style | Cable-to-cable connection | Panel/housing penetration |
| Typical Application | Cable extensions, junctions | Sensor housing, equipment walls |
| Installation | In-line with cable run | Mounted through bulkhead/panel |
| Housing Design | Cylindrical, cable entry on both ends | Flanged, cable entry on one side |
Typical Applications for 10-Pin Connectors
The 10-pin configuration is ideal for applications requiring multiple signal and power channels:
| Application | Typical Pin Assignment | Industry |
|---|---|---|
| ROV Control Systems | 4x motor control + 4x sensor data + 2x power | Underwater robotics |
| Multi-Parameter Sensors | 6x sensor channels + 4x power/ground | Oceanographic research |
| Underwater Cameras | 2x video + 2x control + 4x power + 2x lighting | Inspection/Survey |
| Hydrophone Arrays | 8x audio channels + 2x power | Acoustic monitoring |
| AUV Communication | 4x data + 2x control + 4x power | Autonomous vehicles |
Pin Configuration Options
MCIL10 connectors support flexible pin assignments for mixed signal and power applications:
Standard Configurations
- All Signal: 10x signal pins (RS232, RS485, Ethernet, analog)
- Mixed (6+4): 6x signal + 4x power (common for powered sensors)
- Mixed (8+2): 8x signal + 2x power (data-intensive applications)
- Mixed (4+6): 4x signal + 6x power (power-intensive devices)
- All Power: 10x power pins (high-current distribution)
Custom Pin Assignments
For specific applications, HYSF can configure custom pin assignments:
- Specify pin-by-pin requirements (e.g., Pin 1-4: RS485, Pin 5-8: 12V power, Pin 9-10: ground)
- Provide wiring diagram or pinout table
- We’ll configure connectors and provide test reports
- No additional charge for standard custom pinouts (100+ piece orders)
Cable Compatibility
MCIL10 connectors are designed for multi-conductor underwater cables:
| Cable Parameter | 사양 |
|---|---|
| Conductor Count | 10+ conductors (recommended) |
| Conductor Size | 0.14-1.5mm² (26-16 AWG) |
| Cable OD | 6-12mm (fits standard cable glands) |
| Cable Type | Multi-conductor shielded underwater cable |
| Jacket Material | PU, TPU, PE (compatible with connector backshell) |
Installation and Termination
Termination Methods
- Solder Cup: Traditional method, reliable connections, requires soldering skill
- Crimp Contacts: Faster, more consistent, requires crimping tool (recommended for production)
Installation Steps
- Prepare Cable: Strip outer jacket to expose individual conductors (15-20mm)
- Strip Conductors: Strip each conductor insulation (3-5mm for solder cups)
- Tin Wires: Apply solder to wire ends for easier insertion
- Solder/Crimp: Attach wires to contact tails (follow pin assignment diagram)
- Insert into Housing: Carefully place terminated insert into connector body
- Install Backshell: Secure cable with strain relief and backshell nut
- 테스트: 연속성 및 절연 저항 테스트 수행
- Seal: Apply thread sealant (optional) and mate connectors
필요한 도구
- 와이어 스트리퍼: Precision strippers for small gauge wires (0.14-1.5mm²)
- 납땜 인두: Temperature-controlled, fine tip (for solder cup termination)
- 압착 도구: Ratcheting crimper for consistent crimps (for crimp contacts)
- 멀티미터: 연속성 테스트의 경우
- 메가흄계: 절연 저항 테스트용(권장)
- Torque Wrench: For proper backshell tightening (0.8-1.2 N·m)
Material Selection
| Component | Standard Material | Options |
|---|---|---|
| Housing | 316L 스테인리스 스틸 | Titanium (for 6000m depth) |
| Contacts | Brass, gold-plated | Beryllium copper (high cycle) |
| O-Rings | Viton (FKM) | Silicone, EPDM |
| Backshell | 316L 스테인리스 스틸 | Titanium, Aluminum |
| Insert | Engineering plastic (POM) | PEEK (high temperature) |
주문 정보
When ordering MCIL10 connectors, please specify:
- Model: MCIL10M (male) or MCIL10F (female)
- 수량: Number of pieces (pairs recommended)
- 깊이 등급: 100m, 300m, 1000m, or 3000m (standard)
- Housing Material: 316L SS (standard) or Titanium
- 종료 유형: 납땜 컵 또는 크림프 접점
- Pin Configuration: Standard or custom pinout
- 케이블 입력: Cable OD range (6-12mm standard)
가격 및 리드 타임
| 수량 | 할인 | 리드 타임 | 최상의 대상 |
|---|---|---|---|
| 1-9개 | 표준 가격 | 3~5일 | 샘플, 프로토타입 |
| 10-49개 | 10% 할인 | 5~7일 | Small production |
| 50-99개 | 20% 할인 | 7-10일 | 중간 생산 |
| 100-499 pcs | 30% discount | 10-15일 | Large production (like Liquid Robotics order) |
| 500+ pcs | 35%+ discount | 15-20 days | High volume, OEM |
Example Order: 100 MCIL10M + 100 MCIL10F
Based on typical customer requirements (like Liquid Robotics):
주문 사양
- Products: 100x MCIL10M (male) + 100x MCIL10F (female) = 100 pairs
- 핀 수: 10 pins (gold-plated)
- Housing: 316L 스테인리스 스틸
- 깊이 등급: 1000m (standard for ROV applications)
- 해지: 납땜 컵(또는 요청 시 크림프)
- 케이블 입력: 6-12mm OD
가격 분석
- 기본 가격: $XX.XX 개당(표준 가격)
- 수량: 200 pieces total (100 pairs)
- 볼륨 할인: 30% off (100-499 piece tier)
- 최종 가격: $XX.XX 개당
- 총 주문 금액: $X,XXX.XX
- 리드 타임: 10-15일
- 배송: 미국행 DHL Express (3-5일)
품질 테스트
All MCIL10 connectors undergo comprehensive quality testing:
표준 테스트(포함)
- ✓ 100% continuity testing (all 10 pins)
- 절연 저항(≥1000MΩ @ 500V DC)
- ✓ Hi-pot testing (1500V AC, 60 seconds)
- ✓ Contact resistance (≤10 mΩ per pin)
- ✓ 육안 검사(AQL 2.5)
- ✓ Dimensional verification
선택적 테스트(사용 가능)
- Pressure testing (simulated depth)
- Salt spray testing (corrosion resistance)
- Temperature cycling (-40°C to +85°C)
- 짝짓기 주기 테스트(500회 이상)
- 진동 테스트(IEC 60068-2-6)
Compatible Products
MCIL10 connectors work with these HYSF products:
Related Connectors
- MCBH10M/MCBH10F: Bulkhead version for panel mounting
- MCIL8M/MCIL8F: 8-pin inline (smaller size)
- MCIL12M/MCIL12F: 12-pin inline (higher pin count)
Accessories
- Protective Caps: MCIL-CAP-M (male), MCIL-CAP-F (female)
- Cable Glands: Various sizes for 6-12mm cable OD
- Backshell Kits: Straight and angled options
- Termination Tools: Crimping tools, solder jigs
견적 요청 방법
For MCIL10 connector quotations:
- 문의 보내기: 이메일 info@hysfsubsea.com
- 요구 사항을 지정합니다: MCIL10M/MCIL10F, quantity, depth rating, termination type
- Mention Application: ROV, sensors, etc. (helps with technical recommendations)
- Request Volume Pricing: Specify if you need bulk order discount
응답 시간: Complete quotation within 24-48 hours including volume discounts and freight options
연락처: info@hysfsubsea.com
Need MCIL 10-pin underwater connectors for your ROV or subsea project? Contact us with your specifications and we’ll provide competitive pricing with volume discounts within 24-48 hours.
English
Spanish
Russian
French
German
Korean
Japanese
Arabic
Thai
Danish
Norwegian
