When should I choose Titanium over Stainless Steel?

You should choose Titanium if your equipment is intended for long-term permanent deployment (e.g., ocean observatories) or extreme depths (>3,000m). Titanium is virtually immune to pitting and crevice corrosion in seawater and offers a superior strength-to-weight ratio, which is critical for buoyancy-sensitive vehicles.

While 316L is good, Titanium is the ultimate subsea metal.

  • Corrosion Immunity: unlike Stainless Steel, Titanium does not rely on a passive oxide layer that can be stripped away; it is chemically stable in chloride-rich environments.
  • 무게: Titanium is roughly 45% lighter than steel, allowing ROV designers to reduce the amount of syntactic foam (buoyancy material) required.
  • 비용: While the initial cost is higher, the “Total Cost of Ownership” is lower for long-term projects due to zero maintenance requirements.
John Zhang   사진

존 장

(CEO & 수석 엔지니어)
이메일: info@hysfsubsea.com
해저 인터커넥트 기술 분야에서 15년 이상 전문성을 쌓은 저는 HYSF의 R&D 팀을 이끌며 고압(60MPa) 솔루션 설계를 담당하고 있습니다. 저는 ROV, AUV 및 해양 계측을 위한 누출 없는 신뢰성을 보장하는 데 중점을 두고 있습니다. 저는 개인적으로 맞춤형 커넥터 프로토타입의 검증을 감독합니다.

복잡한 기술적인 질문이 있으신가요?

엔지니어링 도움이 필요하신가요?

엔지니어가 보통 12시간 이내에 답변해 드립니다.

현장에서 검증된 솔루션

글로벌 해양 로봇 공학, 에너지 및 연구 파트너와의 성공적인 협업을 보여주는 쇼케이스입니다. 모든 프로젝트는 무결성 및 운영 안정성에 대한 당사의 노력을 반영합니다.

해저 프로젝트 시작하기 HYSF

표준 커넥터에 대한 빠른 견적이 필요하든 복잡한 맞춤형 케이블 어셈블리에 대한 견적이 필요하든, 엔지니어링 팀이 도와드릴 준비가 되어 있습니다. 12시간 이내에 기술적인 답변을 받으실 수 있습니다.

존 장

CEO

제이슨 리우
케빈 왕
신디 첸
릴리 리
문의 양식 데모