Raskt svar: Cable matching is critical for reliable connections. Key factors: Cable outer diameter (must fit connector), number of conductors (must match connector pins), conductor size (must handle your current), jacket material (must suit your environment). We offer cable assembly service – send us your cable specs or samples and we’ll match the right connector. Popular cable types: Polyurethane (flexible, ROV), TPE (general purpose), Polyethylene (deep water). Tell us your cable OD and we’ll recommend compatible connectors.
Cable-Connector Matching Guide
Key Matching Factors
1. Cable Outer Diameter (OD)
Most critical dimension! Connector must grip cable properly.
| Cable OD Range | Compatible Connector Series | Gland Size |
|---|---|---|
| 4-6mm | MCM miniature series | Small |
| 6-10mm | MCBH 2-6 pin | Medium |
| 10-14mm | MCBH 8-12 pin | Large |
| 14-20mm | MCBH 14-24 pin | Extra Large |
| 20mm+ | Custom connectors | Custom |
2. Number of Conductors
Must match connector pin count (or use fewer pins than available).
- 2 conductors → 2-pin connector (or larger)
- 4 conductors → 4-pin connector (or larger)
- Cannot use 6-conductor cable with 4-pin connector (waste)
- Can use 4-conductor cable with 6-pin connector (2 pins unused)
3. Conductor Size (Wire Gauge)
Must handle your current without overheating.
| Wire Gauge (AWG) | Max Current | Best for |
|---|---|---|
| 22 AWG | 3A | Signal, low power |
| 20 AWG | 5A | Signal, sensors |
| 18 AWG | 10A | Control, medium power |
| 16 AWG | 15A | Power, thrusters (small) |
| 14 AWG | 20A | Power, thrusters (medium) |
| 12 AWG | 30A | High power |
| 10 AWG | 40A | Very high power |
4. Jacket Material
Must suit your environment.
| Jacket Material | Best for | Temperatur | Flexibility |
|---|---|---|---|
| Polyuretan (PUR) | ROV, high flex | -40°C to +80°C | Utmerket |
| TPE | Generelt om marine | -30°C to +70°C | Meget bra |
| Polyethylene (PE) | Deep water, static | -50°C to +60°C | Bra |
| PVC | Freshwater, budget | -15°C to +60°C | Rimelig |
| Neoprene | Oil & gas | -40°C to +90°C | Bra |
Cable Assembly Service
Don’t want to match yourself? We’ll do it for you!
Option 1: Send Us Your Cable
- Ship 1-2 meters of your cable to us
- We measure and identify specifications
- We recommend compatible connectors
- We can assemble connectors for you
Option 2: Tell Us Your Specs
Email us:
- Cable outer diameter (mm)
- Number of conductors
- Conductor size (AWG or mm²)
- Jacket material (if known)
- Application (ROV, sensor, etc.)
We’ll recommend the right connector.
Option 3: Buy Complete Assembly
We sell pre-assembled cable assemblies:
- Connector already attached
- Pressure tested
- Ready to use
- Custom lengths available
Popular Cable Types for Underwater Use
ROV Tether Cable
- Construction: Multiple conductors + strength members
- Jacket: Polyurethane (high flex, abrasion resistant)
- OD: Typically 8-15mm
- Connector: MCBH series with appropriate gland
Sensor Cable
- Construction: 2-8 conductors, often shielded
- Jacket: TPE or polyurethane
- OD: Typically 4-8mm
- Connector: MCM or MCBH series
Power Cable
- Construction: 2-4 large conductors
- Jacket: Neoprene or polyurethane
- OD: Typically 10-20mm
- Connector: High-current MCBH series
Ethernet Cable (Underwater)
- Construction: 4 twisted pairs + drain wire
- Jacket: Polyurethane
- OD: Typically 6-10mm
- Connector: Ethernet-compatible underwater connector
Cable Preparation Tips
For Connector Installation
- Strip outer jacket: Carefully, don’t nick conductors
- Prepare conductors: Strip to correct length
- Tin conductors: Solder tip for easier insertion
- Insert into connector: Follow pinout diagram
- Pot/seal: Use epoxy or potting compound
- Assemble connector: Follow torque specifications
Common Mistakes to Avoid
- ❌ Cable OD too small (won’t seal properly)
- ❌ Cable OD too large (won’t fit in connector)
- ❌ Conductors too large for contacts
- ❌ Wrong stripping length
- ❌ Damaged conductor insulation
- ❌ Inadequate potting/sealing
Need Help?
Cable matching can be tricky. We’re here to help:
- 📧 Email: sales@hysfsubsea.com
- 📎 Attach: Cable spec sheet or photo
- 📏 Include: Cable OD measurement (most important!)
- ⚡ Specify: Current/voltage requirements
Related: Tekniske spesifikasjoner | Cable Assemblies
Need cable matching help? Email sales@hysfsubsea.com with your cable details.
English
Spanish
Russian
French
German
Korean
Japanese
Arabic
Thai
Danish
Norwegian
