Raskt svar: HYSF underwater connector inserts (male and female pairs) are available for field termination of umbilical cables, ROV tethers, and subsea cable assemblies. Choose from 2-12 pin configurations with stainless steel, titanium, or aluminum housing. Bulk orders (100+ pieces) receive volume discounts with OEM/ODM customization options.
Detaljert forklaring
Connector inserts (also called contact inserts or modular inserts) are the core components of underwater connector systems. They house the electrical contacts and provide the sealing interface between male and female connector halves. This guide covers everything you need to know about selecting and ordering underwater connector inserts for cable termination applications.
What Are Connector Inserts?
Connector inserts are modular components that contain the electrical contacts (pins and sockets) within a sealed housing. They are designed to be:
- Installed into connector housings: Inserts fit inside the main connector body
- Field-terminable: Can be wired to cables on-site or in your facility
- Interchangeable: Same insert type works across multiple connector series
- Replaceable: Can be replaced if damaged without replacing entire connector
Male vs Female Inserts
| Type | Contact Type | Typical Application | Installation Side |
|---|---|---|---|
| Male Insert | Pins (protruding contacts) | Sensor side, equipment side | Usually installed in bulkhead housing |
| Female Insert | Sockets (recessed contacts) | Cable side, mating side | Usually installed in cable connector housing |
Standard Pin Configurations
HYSF offers connector inserts in standard pin counts suitable for various applications:
| Antall pinner | Common Applications | Contact Spacing | Gjeldende vurdering |
|---|---|---|---|
| 2-Pin | Simple power, single sensor | Standard | Up to 30A |
| 3-Pin | RS232 (TX, RX, GND) | Standard | Up to 10A |
| 4-Pin | RS485, RS232+power, simple sensors | Standard | Up to 10A |
| 6-Pin | Multi-sensor, video+control | Standard | Up to 7A |
| 8-Pin | Multi-channel data, mixed signal/power | Standard | Up to 5A |
| 12-Pin | Complex systems, multiple signals | Compact | Up to 5A |
Insert Series Compatibility
HYSF connector inserts are compatible with multiple connector housing series:
| Insert Series | Compatible Housing | Thread Size | Pin Count Range |
|---|---|---|---|
| MCBH Inserts | MCBH Series (bulkhead) | 5/8″-18 UNF | 2-12 pinner |
| MCIL Inserts | MCIL Series (inline) | 5/8″-18 UNF | 2-12 pinner |
| Round Small Inserts | Rund liten serie | 3/8″-24 UNF | 2-8 pinner |
| Ultra Small Inserts | Ultra Small-serien | 5/16″-24 UNF | 2-6 pinner |
Field Termination Process
For customers who prefer to terminate cables themselves (like EcoHull and other marine technology companies), HYSF provides connector inserts designed for field termination:
Termination Methods
- Solder Cup: Traditional method, wires are soldered into cups on contact tails
- Crimp Contacts: Faster, more consistent, requires crimping tool
- PCB Mount: For direct circuit board connection (less common for underwater)
Field Termination Steps
- Prepare Cable: Strip outer jacket to expose individual conductors (typically 10-15mm)
- Strip Conductors: Strip each conductor insulation (3-5mm for solder cups)
- Tin Wires: Apply solder to wire ends for easier insertion
- Insert into Contacts: Place tinned wire into solder cup or crimp barrel
- Solder/Crimp: Solder each contact or crimp with proper tool
- Install Insert: Place terminated insert into connector housing
- Secure: Install retaining ring or backshell
- Test: Perform continuity and insulation resistance tests
Required Tools
- Wire Strippers: Precision strippers for small gauge wires
- Soldering Iron: Temperature-controlled, fine tip (for solder cup termination)
- Crimping Tool: Ratcheting crimper for consistent crimps (for crimp contacts)
- Heat Gun: For heat-shrink tubing (optional)
- Multimeter: For continuity testing
- Megohmmeter: For insulation resistance testing (recommended)
Umbilical Cable Applications
Connector inserts are commonly used for umbilical cable termination in various marine applications:
| Application | Typical Pin Count | Cable Type | Insert Recommendation |
|---|---|---|---|
| ROV Tether | 4-12 pins | Multi-conductor umbilical | MCBH or MCIL inserts |
| AUV Charging | 2-6 pinner | Power cable | High-current inserts |
| Subsea Sensors | 4-8 pins | Instrument cable | Round Small inserts |
| Underwater Cameras | 6-8 pins | Video+power cable | MCBH inserts |
| Hydrophone Arrays | 8-24 pins | Multi-pair audio cable | Multiple inserts or custom |
Material Selection for Inserts
| Component | Standard Material | Options | Merknader |
|---|---|---|---|
| Housing | Engineering plastic (POM) | PEEK, PPS | High strength, excellent insulation |
| Kontaktpersoner | Brass, gold-plated | Beryllium copper, stainless steel | Gold plating ensures low contact resistance |
| Sealing | Viton O-rings | Silicone, EPDM | Viton for seawater, high temperature |
| Backshell | 316L rustfritt stål | Titanium, Aluminum | Matches connector housing material |
Ordering Connector Inserts
When ordering connector inserts for field termination, please specify:
- Insert Type: Male (pins) or Female (sockets)
- Antall pinner: Number of contacts (2, 3, 4, 6, 8, 12, etc.)
- Series Compatibility: MCBH, MCIL, Round Small, Ultra Small
- Termination Method: Solder cup or crimp contacts
- Antall: Number of insert pairs needed
- Søknad: Umbilical cable, ROV tether, sensor, etc. (for technical support)
Bulk Order Pricing
HYSF offers volume discounts for bulk orders of connector inserts:
| Quantity | Rabatt | Lead Time | Best for |
|---|---|---|---|
| 1-9 pairs | Standard pricing | 3-5 days | Samples, prototypes |
| 10-49 pairs | 10% discount | 5-7 days | Small production runs |
| 50-199 pairs | 20% discount | 7-10 dager | Medium production |
| 200-499 pairs | 30% discount | 10-15 dager | Large production |
| 500-999 pairs | 35% discount | 15-20 days | High volume |
| 1000+ pairs | 40%+ discount (negotiable) | 20-30 days | OEM partnerships |
OEM/ODM Services for Volume Orders
For orders of 500+ pieces, HYSF offers OEM/ODM customization:
Customization Options
- Custom Pinout: Configure pin assignments to match your cable harness
- Logo Marking: Your company logo on connector housing
- Custom Packaging: Branded packaging for resale or distribution
- Modified Dimensions: Adjust insert size for special applications
- Special Materials: Exotic materials for extreme environments
- Quality Documentation: Enhanced testing and certification for regulated industries
Quality Testing for Inserts
All HYSF connector inserts undergo rigorous quality testing:
Standard Tests (Included)
- Continuity Test: Verify all contacts are properly connected
- Insulation Resistance: ≥1000 MΩ @ 500V DC between contacts
- Hi-Pot Test: 1500V AC for 60 seconds (no breakdown)
- Contact Resistance: ≤10 mΩ per contact
- Visual Inspection: Check for defects, proper assembly
Optional Tests (Available)
- Pressure Testing: Simulated depth pressure testing
- Salt Spray Test: Corrosion resistance verification
- Temperature Cycling: Thermal shock resistance
- Mating Cycle Test: Durability over repeated connections
- Vibration Testing: Resistance to mechanical vibration
Example Order: 1000 Sets for Umbilical Cable
Based on typical customer requirements (like EcoHull S.A.):
Order Specification
- Produkt: MCBH 8-pin connector inserts (male + female pairs)
- Antall: 1000 sets (2000 individual inserts)
- Termination: Solder cup type for field termination
- Housing Material: Engineering plastic (POM)
- Contacts: Brass, gold-plated
- Søknad: Umbilical cable for marine technology systems
Pricing Breakdown
- Base Price: $XX.XX per set (standard pricing)
- Volume Discount: 40% off (1000+ quantity tier)
- Final Price: $XX.XX per set
- Total Order Value: $X,XXX.XX
- Lead Time: 20-30 days
- Shipping: DHL Express to Greece (3-5 days)
What’s Included
- 1000 male inserts (8-pin, solder cup)
- 1000 female inserts (8-pin, solder cup)
- Technical datasheets for all inserts
- Termination instructions
- Quality test reports (per batch)
- 12-month warranty against manufacturing defects
How to Request a Quote
For connector insert quotations, especially bulk orders:
- Send Inquiry: Email info@hysfsubsea.com with your requirements
- Include Specifications: Pin count, series, termination type, quantity
- Attach Cable Specs: If available, provide cable specifications for compatibility check
- Mention Application: Umbilical cable, ROV, sensor, etc.
- Request Volume Pricing: Specify if you need bulk order discount
Svartid: Complete quotation within 24-48 hours including volume discounts and freight options
Contact: info@hysfsubsea.com
Need connector inserts for your umbilical cable or subsea application? Contact us with your specifications and we’ll provide competitive pricing with volume discounts within 24-48 hours.
English
Spanish
Russian
French
German
Korean
Japanese
Arabic
Thai
Danish
Norwegian
