How Do I Clean Connectors After Saltwater Use?

Быстрый ответ

After saltwater: 1) Rinse with fresh water, 2) Soft brush for debris, 3) Dry with lint-free cloth, 4) Apply dielectric grease, 5) Store with caps. No harsh chemicals or compressed air.

Подробное объяснение

Cleaning Procedure

| Step | Action | Details |

### What NOT to Use

**Avoid:**
– Compressed air (forces water into seals)
– Harsh chemicals (damages O-rings)
– Solvents (degrades plastics)
– Wire brushes (scratches surfaces)
– Heat guns (damages components)

### Cleaning Solutions

**Safe:**
– Fresh water (best)
– Mild soap solution (optional)
– Isopropyl alcohol (contacts only)
– Dedicated connector cleaners

### Drying Guidelines

– Air dry in clean environment
– Do not apply heat
– Ensure no moisture in crevices
– Wait 24 hours before storage if wet

### Maintenance Schedule

| Usage | Cleaning Frequency |

## Contact/CTA

Email: support@hysfsubsea.com for cleaning product recommendations. Proper cleaning extends connector life significantly.