Перейти к содержимому
Быстрый ответ
Use silicone-based grease (Dow Corning 111 or equivalent) for O-rings. Never use petroleum-based products. Apply thin, even coat to O-rings only – not on electrical contacts. Reapply after each mating.
Быстрый ответ
Use silicone-based grease (Dow Corning 111 or equivalent) for O-rings. Never use petroleum-based products. Apply thin, even coat to O-rings only – not on electrical contacts. Reapply after each mating.
Recommended Lubricants
| Product | Type | Диапазон температур | Лучшее для |
|---|---|---|---|
| Dow Corning 111 | Силикон | -40°C to +200°C | Standard O-rings |
| Molykote 111 | Силикон | -40°C to +200°C | Equivalent alternative |
| Krytox GPL 226 | PFPE | -40°C to +260°C | Extreme conditions |
| Braycote 601 | Fluorinated | -73°C to +204°C | High performance |
What NOT to Use
- ❌ Petroleum jelly (Vaseline): Degrades rubber
- ❌ WD-40: Not a lubricant, damages seals
- ❌ Motor oil: Incompatible with O-ring materials
- ❌ Grease with additives: May cause swelling
- ❌ Dielectric grease: Can interfere with connections
Application Procedure
- Чистота: Wipe O-ring and groove with clean cloth
- Apply: Small amount of grease on fingertip
- Spread: Thin, even coat on entire O-ring
- Install: Place O-ring in groove carefully
- Wipe excess: Remove any grease on mating surfaces
Important Notes
- Never lubricate electrical contacts – causes resistance
- Use sparingly – excess attracts contamination
- Reapply each time – grease washes off
- Store properly – keep grease container sealed
Свяжитесь с нами
Maintenance questions: [email protected]
