BH10F 10-Pin Female Bulkhead Underwater Connector – SubConn Compatible

Product Overview

Сайт HYSF SUBSEA BH10F is a high-performance 10-pin female bulkhead underwater connector designed for reliable electrical connections through subsea pressure housings, underwater equipment enclosures, and marine instrument panels.As part of the HYSF Standard Circular Series, the BH10F features ten gold-plated female electrical contacts, a corrosion-resistant 316L stainless steel housing, and a precision-engineered watertight sealing system.Designed for operating depths of up to 6,000 meters (60 MPa), the BH10F provides a dependable electrical interface between internal equipment electronics and external subsea cable assemblies.The connector supports an electrical rating of 550V AC/DC and 10A per contact, making it suitable for multi-channel signal transmission, electrical control circuits, underwater instrumentation, and appropriate power distribution applications.The standard BH10F configuration includes approximately 0.3 meters of internal wire leads and a 5/8-18 UNF-2A mounting thread for installation in compatible underwater equipment housings.The BH10F is designed to mate with the IL10M 10-pin male inline underwater connector and is compatible with corresponding SubConn and SEACON Standard Circular connector interfaces.Typical applications include remotely operated vehicles (ROVs), autonomous underwater vehicles (AUVs), oceanographic instruments, subsea sensors, underwater camera systems, offshore monitoring equipment, and deep-sea research platforms.

Key Features and Benefits

1. Ten Gold-Plated Female Electrical Contacts

The BH10F incorporates ten precision-manufactured female electrical contacts within a compact circular mating interface.Its ten-contact arrangement allows multiple electrical circuits to pass through a single bulkhead installation point.This configuration is suitable for applications involving:

• Multiple underwater sensor channels
• Electrical control signals
• Marine instrumentation
• Auxiliary power connections
• Subsea monitoring equipment
• Multi-core cable assemblies
• Underwater electronic modules

Gold-plated contact surfaces help maintain reliable electrical conductivity and reduce contact-surface oxidation.The female contact configuration is designed to mate securely with the corresponding IL10M male inline connector.

2. Marine-Grade 316L Stainless Steel Housing

The standard BH10F features a precision-machined 316L stainless steel housing, selected for demanding marine environments.316L stainless steel provides several advantages:

• Good resistance to seawater corrosion
• High mechanical strength
• Durability under external hydrostatic pressure
• Reliable threaded mounting
• Dimensional stability
• Suitability for deep-water equipment installations

The metal housing provides mechanical support for the electrical contact assembly and allows the connector to be securely installed through compatible enclosure walls.When the BH10F is installed in an aluminum housing, galvanic corrosion protection should be evaluated as part of the overall equipment design.

3. Designed for 6,000-Meter Water Depth

The BH10F is designed to operate at external hydrostatic pressures of up to 60 MPa, equivalent to approximately 6,000 meters of seawater depth.Its watertight construction is intended to maintain electrical isolation between the external marine environment and internal equipment circuits.This deep-water capability makes the connector suitable for:

• Deep-sea scientific instruments
• Underwater robotic vehicles
• Offshore inspection equipment
• Oceanographic monitoring systems
• Marine exploration platforms
• Subsea electronic enclosures

The complete installation must use the correct housing dimensions, sealing components, and assembly procedures to achieve the intended pressure performance.

4. SubConn and SEACON Compatible Interface

The HYSF BH10F is designed for compatibility with corresponding SubConn and SEACON Standard Circular underwater connector configurations.This compatibility makes it a practical option for customers requiring:

• Replacement underwater bulkhead connectors
• Compatible subsea cable interfaces
• Marine equipment maintenance
• Underwater system upgrades
• OEM subsea instrumentation
• Standardized electrical connections

For replacement applications, customers should verify the connector series, contact arrangement, mating gender, and installation dimensions before selecting the BH10F.

5. Wet-Mateable Underwater Connection

The BH10F belongs to HYSF SUBSEA’s wet-mateable Standard Circular connector family.When paired with the corresponding IL10M male inline connector, the interface is designed to support underwater mating and unmating.This capability is useful for subsea equipment that requires periodic maintenance, cable replacement, or modular system integration.Important: Electrical power should normally be disconnected before mating or unmating unless the complete connector assembly has been specifically qualified for energized operation.

6. Precision 5/8-18 UNF-2A Mounting Thread

The BH10F uses a 5/8-18 UNF-2A mounting thread for secure installation in compatible underwater equipment housings.The standard mounting configuration includes:

• Mounting Thread: 5/8-18 UNF-2A
• Nominal Thread Length: 19 mm
• Installation Type: Threaded Bulkhead
• Standard Housing Material: Нержавеющая сталь 316L

The threaded design supports secure panel mounting and accurate positioning of the connector within an enclosure.Before machining the equipment housing, the mounting hole dimensions, wall thickness, sealing surface, and installation clearance should be verified using the approved mechanical drawing.

7. Watertight O-Ring Sealing

The BH10F incorporates a bulkhead sealing arrangement designed to prevent seawater ingress through the connector mounting interface.O-ring sealing provides a barrier between the connector housing and the equipment panel.Proper sealing performance depends on:

• Correct O-ring dimensions
• Suitable sealing material
• Proper groove geometry
• Clean sealing surfaces
• Appropriate O-ring compression
• Correct installation procedures

Depending on the selected configuration, customized sealing arrangements may be available.For high-pressure equipment, the complete housing and bulkhead assembly should be validated under the intended operating conditions.

8. Standard 0.3-Meter Internal Wire Leads

The BH10F is normally supplied with approximately 0.3 meters of internal wire leads.These leads allow the bulkhead connector to be electrically connected to equipment inside the pressure housing.The standard pigtail arrangement simplifies integration into underwater electronic modules, marine instrumentation, and control systems.Available customization options may include:

• Longer internal wire leads
• Different conductor specifications
• Customized pin assignments
• Numbered wire identification
• Application-specific terminations
• OEM bulkhead connector assemblies

The actual wiring arrangement should always be confirmed against the supplied wiring diagram.

9. Optional Anodized Aluminum Housing

In addition to the standard 316L stainless steel construction, the BH10F may be supplied with an anodized aluminum housing.Aluminum configurations may be useful for underwater equipment requiring reduced weight or improved material compatibility with aluminum pressure housings.Material selection should consider:

• Operating depth
• Equipment weight requirements
• Corrosion protection
• Housing compatibility
• Mechanical strength
• Surface treatment
• Long-term seawater exposure

Custom housing materials and sealing arrangements are subject to technical review.

BH10F Technical Specifications

Параметр	Технические характеристики
Brand	HYSF SUBSEA
Модель	BH10F
Серия продуктов	Standard Circular
Тип разъема	Накладная розетка
Количество контактов	10
Contact Gender	Female
Contact Finish	Gold-Plated
Standard Housing Material	Нержавеющая сталь 316L
Optional Housing Material	Anodized Aluminum
Mounting Style	Threaded Bulkhead
Монтажная резьба	5/8-18 UNF-2A
Nominal Thread Length	19 mm
Rated Voltage	550V AC/DC
Rated Current	10A per Contact
Maximum Operating Depth	6,000 m
Pressure Rating	60 MPa
Mating Capability	Wet-Mateable
Standard Internal Wire Length	0.3 m
Custom Wire Lengths	Available
Sealing System	O-Ring Sealing
Mating Inline Connector	IL10M
Protective Dummy Connector	DC10M
SubConn Compatibility	Corresponding Standard Circular Interfaces
SEACON Compatibility	Corresponding Standard Circular Interfaces
Warranty	12 Months

Note: Customized housing materials, thread lengths, and sealing configurations may require different mechanical dimensions. Always verify the approved technical drawing before machining the equipment housing.

Standard 10-Pin Wiring Reference

The HYSF SUBSEA Standard Circular 10-pin series uses the following standard cable wire colors:

Pin Number	Wire Color
1	Red
2	Red/White
3	Black
4	Black/White
5	Yellow
6	Yellow/White
7	Blue
8	Blue/White
9	Orange
10	Orange/White

This table represents the standard cable wiring reference for the 10-pin Standard Circular Series.Important: Bulkhead connectors may be supplied with numbered internal leads or alternative wire identification arrangements. The actual pin-to-wire mapping should be verified against the corresponding wiring diagram.

Compatible Mating Connectors and Accessories

IL10M – 10-Pin Male Inline Underwater Connector

Сайт IL10M is the standard mating connector for the BH10F female bulkhead receptacle.Typical IL10M characteristics include:

• Ten male electrical contacts
• Molded neoprene rubber body
• Gold-plated electrical contacts
• Standard 1-meter underwater cable
• Wet-mateable construction
• 6,000-meter depth rating

When mated, the IL10M and BH10F provide a detachable electrical connection between the external underwater cable and the equipment electronics inside the pressure housing.

DC10M – 10-Pin Male Dummy Plug

Сайт DC10M is the corresponding male protective dummy connector for the BH10F female bulkhead interface.When the IL10M cable connector is disconnected, the DC10M can be installed to help protect the exposed mating interface.The dummy plug helps reduce contamination and accidental mechanical damage during equipment storage, maintenance, and suitable underwater operations.The DC10M is a protective accessory and does not provide an electrical connection.

BH10M – 10-Pin Male Bulkhead Connector

Сайт BH10M is the male-contact version of the Standard Circular 10-pin bulkhead connector.The standard mating relationships are:

• BH10F mates with IL10M.
• BH10M mates with IL10F.

Both bulkhead configurations belong to the same Standard Circular connector family.

Типовые применения

Remotely Operated Vehicles (ROVs)

ROVs often require multiple electrical connections through sealed pressure housings.The BH10F can be installed in underwater electronics enclosures to support suitable connections involving:

• External sensors
• Camera systems
• Control electronics
• Monitoring equipment
• Auxiliary instrumentation

Its ten-contact arrangement allows multiple circuits to pass through one bulkhead interface.

Autonomous Underwater Vehicles (AUVs)

AUVs frequently contain multiple electronic modules and external instruments.The BH10F provides a panel-mounted electrical interface for suitable power, signal, and control circuits.Its detachable mating design can simplify equipment maintenance and cable replacement.

Underwater Camera Housings

Underwater camera systems require reliable electrical connections between external cables and sealed camera enclosures.The BH10F can provide a watertight bulkhead interface for appropriate electrical circuits.Compatibility with specific video or Ethernet protocols depends on the cable construction, conductor pairing, and complete system design.

Oceanographic Instrumentation

The BH10F is suitable for applications involving:

• CTD-related instruments
• Marine environmental sensors
• Oceanographic monitoring systems
• Underwater acoustic equipment
• Scientific data acquisition devices
• Seabed observation platforms

Its ten-contact arrangement provides additional wiring capacity for instruments requiring multiple electrical channels.

Offshore Inspection Equipment

Offshore systems frequently operate in environments involving seawater exposure, high hydrostatic pressure, and mechanical stress.The BH10F can be integrated into subsea electronic housings used for monitoring, inspection, and instrumentation.

Marine Research Platforms

Research organizations and subsea equipment manufacturers may require customized bulkhead electrical connections for specialized instruments.The BH10F offers a standardized ten-contact interface suitable for integration into compatible pressure housings and marine electronic systems.

Installation Guidelines

Correct installation is essential for maintaining watertight performance.

Step 1: Confirm Mounting Dimensions

Verify the 5/8-18 UNF-2A mounting thread and the required panel opening dimensions.Check the available installation space and housing wall thickness.

Step 2: Inspect the Connector

Examine the housing, electrical contacts, and sealing surfaces for scratches, damage, or contamination.

Step 3: Prepare the Mounting Surface

Ensure the equipment housing has been machined according to the approved technical drawing.Remove sharp edges, metal particles, and other contaminants.

Step 4: Inspect the O-Ring

Check the sealing component for damage, deformation, or contamination.Use the correct O-ring specification and follow the appropriate installation instructions.

Step 5: Install the BH10F

Position the connector in the equipment housing and secure it using the specified mounting arrangement.Avoid excessive mechanical stress or overtightening.

Step 6: Connect the Internal Wiring

Connect the internal wire leads according to the approved wiring diagram.Verify the pin assignments before applying electrical power.

Step 7: Mate the IL10M Connector

Inspect the mating surfaces and align the IL10M correctly with the BH10F.Follow the recommended mating procedure and avoid excessive insertion force.

Step 8: Perform Final Testing

Verify electrical continuity and insulation performance.Where required, conduct hydrostatic pressure testing of the complete enclosure assembly before deployment.

Quality Control and Testing

HYSF SUBSEA supports underwater connector manufacturing through quality-control procedures such as:

• Hydrostatic pressure testing
• Electrical continuity testing
• Insulation resistance measurement
• Dielectric withstand testing
• Contact inspection
• Dimensional verification
• O-ring sealing inspection
• Mechanical integrity checks

Additional testing and documentation can be specified according to project requirements.

Frequently Asked Questions

Q1: What is BH10F?

BH10F is a ten-contact female bulkhead underwater electrical connector in the HYSF Standard Circular Series.

Q2: Which inline connector mates with BH10F?

The standard mating connector is the IL10M 10-pin male inline underwater connector.

Q3: Is BH10F compatible with SubConn connectors?

Yes. BH10F is designed for compatibility with corresponding SubConn Standard Circular underwater connector configurations.

Q4: What is the mounting thread size?

The standard mounting thread is 5/8-18 UNF-2A.

Q5: What is the housing material?

The standard housing is manufactured from 316L stainless steel. Anodized aluminum versions may also be available.

Q6: What is the maximum operating depth?

The BH10F is designed for underwater depths of up to 6 000 метров, equivalent to approximately 60 MPa.

Q7: What are the electrical ratings?

The connector is rated for 550V AC/DC and 10A per contact.

Q8: What is the standard internal wire length?

The standard internal wire lead length is approximately 0.3 meters.

Q9: Can BH10F be connected underwater?

Yes. BH10F belongs to the wet-mateable Standard Circular Series. Electrical power should normally be disconnected before mating or unmating.

Q10: Does BH10F require O-ring sealing?

Yes. The bulkhead installation uses an O-ring sealing arrangement to help maintain watertight integrity.

Q11: Which dummy connector protects BH10F?

The corresponding protective accessory is the DC10M male dummy plug.

Q12: Is BH10F the same as MCBH10F?

No. BH10F belongs to the Standard Circular Series, while MCBH10F belongs to the Micro Circular Series. Their mating interfaces and mounting dimensions are different.

Q13: Can the internal wire length be customized?

Yes. Alternative internal wire lengths and termination arrangements can be manufactured according to project requirements.

Q14: Can BH10F be installed in an aluminum housing?

Yes, provided the installation dimensions and sealing arrangement are suitable. Galvanic corrosion protection should be considered when stainless steel and aluminum components are exposed to seawater.

Why Choose HYSF SUBSEA?

HYSF SUBSEA specializes in underwater electrical connectors, bulkhead connectors, marine cable assemblies, and customized subsea interconnection solutions.Our manufacturing capabilities include:

• SubConn-compatible underwater connector production
• Precision-machined stainless steel bulkhead housings
• Standard and custom underwater cable assemblies
• Deep-water pressure testing
• OEM and ODM engineering support
• Mechanical drawings and 3D models
• Customized wiring and termination solutions
• Underwater connector accessories
• 12-month product warranty

Сайт BH10F 10-pin female bulkhead underwater connector provides a durable electrical interface for marine equipment requiring multiple circuits, reliable pressure-resistant sealing, and compatibility with established subsea connector systems.