How Do I Clean Connectors After Saltwater Use?

## Quick Answer

1) Fresh water rinse, 2) Soft brush, 3) Dry, 4) Dielectric grease, 5) Store capped. No harsh chemicals or compressed air.

## Cleaning Steps

1. Fresh water rinse immediately
2. Soak 10-15 min if needed
3. Gentle brushing
4. Final rinse
5. Dry with lint-free cloth
6. Lubricate O-rings
7. Cap both ends

## Avoid

– Compressed air
– Harsh chemicals
– Solvents
– Wire brushes
– Heat guns

## ติดต่อ

Email: support@hysfsubsea.com for product recommendations