How to properly install and terminate underwater connectors?

빠른 답변

Proper installation requires: (1) Clean all surfaces, (2) Inspect O-rings, (3) Apply appropriate lubricant, (4) Hand-tighten then torque to specification, (5) Test electrical continuity before deployment. Always follow manufacturer torque specifications and use proper tools.

Installation Steps

1. Preparation: Clean mating surfaces with fresh water
2. 검사: Check O-rings for damage
3. Lubrication: Apply silicone grease to O-rings
4. Mating: Align keyways, hand-tighten
5. Torquing: Use spanner wrench to specified torque
6. 테스트: Verify electrical continuity

문의하기

Technical inquiries: info@hysfsubsea.com