コンテンツにスキップ
クイックアンサー
After saltwater: 1) Rinse with fresh water, 2) Soft brush for debris, 3) Dry with lint-free cloth, 4) Apply dielectric grease, 5) Store with caps. No harsh chemicals or compressed air.
Detailed Explanation
Cleaning Procedure
| Step | Action | Details |
| —— | ——– | --- | |
|---|---|---|---|
| 1 | Fresh water rinse | Immediately after retrieval | |
| 2 | Soak (if needed) | 10-15 min in fresh water | |
| 3 | Gentle brushing | Soft brush, remove debris | |
| 4 | Final rinse | Ensure all salt removed | |
| 5 | Dry | Lint-free cloth, air dry | |
| 6 | Lubricate | Dielectric grease on O-rings | |
| 7 | Cap | Protective caps on both ends |
### What NOT to Use
**Avoid:**
– Compressed air (forces water into seals)
– Harsh chemicals (damages O-rings)
– Solvents (degrades plastics)
– Wire brushes (scratches surfaces)
– Heat guns (damages components)
### Cleaning Solutions
**Safe:**
– Fresh water (best)
– Mild soap solution (optional)
– Isopropyl alcohol (contacts only)
– Dedicated connector cleaners
### Drying Guidelines
– Air dry in clean environment
– Do not apply heat
– Ensure no moisture in crevices
– Wait 24 hours before storage if wet
### Maintenance Schedule
| Usage | Cleaning Frequency |
| ——- | ——————- | |
|---|---|---|
| Daily use | After each use | |
| Weekly use | After each use | |
| Monthly use | After each use + monthly inspection | |
| Storage | Clean before storage |
## Contact/CTA
Email: [email protected] for cleaning product recommendations. Proper cleaning extends connector life significantly.
