5501-2013 Burton 55 Series Compatible 13-Pin Straight Cable Plug Underwater Connector
Product Overview
The
HYSF SUBSEA 5501-2013 Burton 55 Series Compatible 13-Pin Straight Cable Plug is a subsea electrical connector designed for underwater equipment requiring multiple electrical circuits for power, control, and data transmission.Featuring a Shell Size 20 configuration and thirteen female socket contacts, the 5501-2013 provides a multi-contact electrical interface for subsea cable assemblies, ROV systems, underwater tooling, and offshore equipment.The connector follows the Burton 5500 Series interface and is designed for compatibility with corresponding 55 Series receptacles.Its construction features an integrally molded elastomer body, a corrosion-resistant passivated 316L stainless steel shell, and high-conductivity copper-alloy electrical contacts.The original Burton contact arrangement specifies thirteen 18 AWG conductors for the 2013 configuration.One of the important advantages of the 13-pin configuration is its potential for combined Ethernet and power applications. With the appropriate Ethernet cable construction and wiring arrangement, the Burton 5500 Series supports 1000Base-T network performance alongside power transmission in a single subsea cable assembly.The original Burton technical catalog specifies Ethernet performance up to 1 Gbps for cable lengths up to 75 meters.The 5501-2013 is suitable for ROV systems, subsea control modules, Ethernet communication systems, umbilical terminations, marine instrumentation, and offshore electrical installations.
Key Features and Benefits
1. Thirteen-Pin Electrical Configuration
The 5501-2013 features thirteen female socket contacts in a Shell Size 20 configuration.The thirteen-contact arrangement provides multiple independent electrical circuits within a single subsea connector interface.Typical applications include:
- Multi-channel power connections
- Ethernet communication
- ROV electrical systems
- Underwater sensor connections
- Subsea control circuits
- Marine instrumentation
- Auxiliary equipment connections
- Combined power and data transmission
- Subsea monitoring systems
The thirteen female socket contacts are designed to mate with compatible male pin receptacles in the Burton 55 Series.
2. Burton 55 Series Compatibility
The 5501-2013 follows the Burton 5500 Series dimensional and mating interface.The 55 Series is widely used in subsea equipment, ROV systems, offshore installations, and underwater electrical assemblies.Its standardized interface allows compatible cable plugs and receptacles to be integrated into existing subsea systems.The 5501-2013 can be considered as a replacement or alternative for compatible Burton 55 Series cable plug installations.Compatibility should be confirmed against the exact shell size, contact arrangement, keyway, and mating dimensions.
3. Shell Size 20 Configuration
The 5501-2013 uses a Shell Size 20 metal shell with thirteen electrical contacts.The Shell Size 20 configuration provides sufficient space for thirteen independent electrical contact positions within a single connector interface.This design is particularly useful for subsea equipment requiring multiple power, signal, and communication circuits.
4. Thirteen 18 AWG Conductors
The original Burton 5500 Series technical catalog specifies the 2013 contact arrangement as:
13 × 18 AWG conductorsThis configuration provides thirteen independent electrical contact positions for multi-channel electrical connections.The conductor arrangement can be used for appropriately designed power, signal, control, and communication circuits.Actual current capacity must be evaluated according to conductor size, cable construction, operating temperature, conductor bundling, and electrical loading.
5. Ethernet and Power Combination
One of the important applications of the 5501-2013 connector configuration is combined Ethernet and power transmission.The Burton 5500 Series Ethernet cable assembly solution is designed to transmit high-speed network data and electrical power through a single subsea cable assembly.The original Burton technical catalog specifies:
- 1000Base-T Ethernet performance
- Up to 1 Gbps data transmission
- Combined Ethernet and power transmission
- 600 V standard voltage rating
- Connector and cable pressure rating of 10,000 psi
- Ethernet cable length up to 75 meters
The Ethernet configuration is particularly useful for ROV systems, subsea cameras, underwater monitoring equipment, and subsea communication networks.
Important: Gigabit Ethernet performance requires the appropriate Ethernet-specific cable, contact assignment, and assembly configuration. A standard 13-pin connector without the correct Ethernet wiring does not automatically support 1000Base-T.
6. Straight Cable Plug Design
The 5501-2013 features a straight cable connector plug configuration.Its straight design allows the cable to extend axially from the connector body.This configuration is suitable for conventional cable routing in:
- ROV systems
- Subsea tooling
- Umbilical assemblies
- Underwater control systems
- Marine instrumentation
- Offshore electrical equipment
- Ethernet communication systems
For applications requiring a 90-degree cable exit, the compatible 55R1-2013 right-angle cable plug configuration can be considered.
7. Thirteen Female Socket Contacts
The 5501-2013 features thirteen female socket contacts.In the Burton 5500 Series connector architecture, cable plugs contain female socket contacts, while compatible receptacles contain male pin contacts.This arrangement provides a defined electrical interface for compatible bulkhead and flange receptacles.The original Burton technical catalog specifies high-conductivity copper-alloy contacts.Contact plating and electrical performance should be confirmed against the approved production configuration.
8. Integrally Molded Elastomer Body
The connector features an integrally molded elastomer body.The molding process bonds the elastomer to the internal metal structure, providing mechanical protection and environmental sealing.The molded construction helps protect the internal electrical contacts and cable termination area.The elastomer body also provides mechanical protection for the cable connection during handling and underwater operation.
9. Passivated 316L Stainless Steel Shell
The standard Burton 5500 Series uses passivated 316L stainless steel for its connector shell.This material provides:
- Marine corrosion resistance
- Mechanical strength
- Seawater compatibility
- Structural protection
- Long-term subsea equipment suitability
The stainless steel shell provides a robust mechanical interface for demanding offshore and underwater applications.
10. 600V Standard Voltage Rating
The standard Burton 5500 Series voltage rating is 600 V.This makes the connector suitable for appropriately designed subsea power and control circuits.The wider 5500 Series family also offers selected high-voltage configurations, including 1000 V, 2000 V, and 3000 V options.However, higher-voltage configurations require specific contact arrangements and insulation designs.The standard 5501-2013 configuration should not be assumed to support these higher voltages without separate engineering confirmation.
11. High-Pressure Subsea Capability
The Burton 5500 Series technical documentation specifies a pressure rating of 10,000 psi, approximately 690 bar.The connector family uses metal shells, recessed receptacle pins, and an integrated face-type sealing arrangement.This construction is designed for demanding underwater applications.The complete installed assembly should be evaluated according to the mating receptacle, cable construction, mounting configuration, and operating environment.
12. Customized Cable Lengths
The 5501-2013 is a factory-molded cable connector plug.The standard assembly consists of one connector at one end and an open cable end at the other.The cable length is specified through the final part-number suffix.For example:
- 5501-2013-0004: 4 ft cable assembly
Customized cable assemblies can be evaluated according to project requirements.Available customization options may include:
- Cable length
- Cable conductor size
- Ethernet cable construction
- Cable jacket material
- Cable outside diameter
- Conductor identification
- Ethernet pin assignment
- Cable termination
- Customized cable assembly
The exact cable specification should be confirmed before production.
13. Dry-Mate Connection Design
The Burton 5500 Series is a dry-mate underwater connector family.Its mating interface uses an integrated face-type sealing arrangement.The connector should be connected and disconnected in a dry environment, with electrical circuits de-energized before mating or unmating.It should not be treated as a connector designed for live underwater mating operations.
14. Suitable for ROV and Offshore Applications
The 5501-2013 is particularly suitable for underwater equipment requiring multiple electrical circuits and data communication.Potential applications include:
- Work-Class ROV systems
- ROV toolskids
- Subsea Ethernet communication
- Subsea umbilical assemblies
- Subsea control modules
- Underwater cameras
- Marine instrumentation
- Offshore inspection equipment
- Subsea monitoring systems
- AUV and underwater robotic systems
- Subsea electrical distribution
5501-2013 Technical Specifications
| Parameter | Specification |
|---|
| Brand | HYSF SUBSEA |
| Model | 5501-2013 |
| Connector Series | Burton 5500 Series Compatible |
| Product Type | Straight Cable Connector Plug (CCP) |
| Shell Size | 20 |
| Number of Contacts | 13 |
| Contact Gender | Female Socket |
| Installation Type | Inline / Cable Mount |
| Connector Configuration | Straight |
| Contact Arrangement | 13 × 18 AWG |
| Cable Termination | One Connector End / One Open Cable End |
| Cable Length | Customized |
| Connector Body Material | Integrally Molded Elastomer |
| Shell Material | Passivated 316L Stainless Steel |
| Contact Material | High-Conductivity Copper Alloy |
| Standard Voltage Rating | 600 V |
| Current Capacity | Refer to Ampacity Appendix and approved configuration |
| Pressure Rating | 10,000 psi / Approximately 690 bar |
| Ethernet Configuration | 1000Base-T Ethernet + Power, with dedicated assembly |
| Ethernet Performance | Up to 1 Gbps |
| Ethernet Cable Length | Up to 75 m (original Burton catalog specification) |
| Connector Type | Dry-Mate |
| Mating Interface | Compatible Burton 55 Series Receptacle |
Engineering Note: The original Cooper Interconnect Burton 5500 Series catalog specifies the 2013 contact arrangement as thirteen 18 AWG conductors. It specifies a 10,000 psi series pressure rating, a standard 600 V rating, and high-conductivity copper-alloy contacts. The original catalog directs users to its Ampacity appendix for current capacity rather than specifying a universal current rating for the 2013 configuration.The Ethernet performance of up to 1 Gbps and cable length up to 75 meters apply to the dedicated Ethernet cable assembly configuration, not automatically to every standard 13-pin cable assembly.Confirm the exact electrical ratings, contact plating, cable specifications, dimensions, and pressure qualification of the HYSF production version against approved engineering drawings and test records.
Thirteen-Pin Contact Configuration
The 5501-2013 features thirteen female socket contacts.The original Burton contact arrangement identifies the 2013 configuration as:
13 × 18 AWGThe Burton 5500 Series uses socket contacts in cable plugs and male pin contacts in compatible receptacles.The thirteen-contact arrangement provides an electrical interface for appropriately designed power, signal, control, and communication circuits.Before cable assembly or equipment integration, engineers should verify:
- The thirteen contact positions.
- The mating-face orientation.
- The conductor identification.
- The pin-to-wire assignment.
- Ethernet differential pair assignments, where applicable.
- Electrical continuity.
- Insulation resistance.
- Cable termination requirements.
For Ethernet applications, the correct differential-pair assignment and cable construction are particularly important for maintaining signal integrity.
Important: The exact contact numbering and conductor colors should follow the approved 5501-2013 production wiring diagram.
Ethernet and Power Cable Assembly Configuration
The 5501-2013 can be incorporated into a dedicated Ethernet and power cable assembly.This arrangement allows subsea equipment to receive electrical power and network communication through a single connector interface.The Burton Ethernet solution supports:
- 1000Base-T network communication
- Up to 1 Gbps transmission performance
- Combined power and Ethernet
- 600 V standard voltage rating
- Up to 10,000 psi pressure rating
- Cable lengths up to 75 meters according to the original catalog
Typical applications include:
- Subsea Ethernet cameras
- ROV communication systems
- Underwater network devices
- Subsea monitoring equipment
- Remote control modules
- Ethernet-enabled marine instruments
The Ethernet cable, conductor arrangement, pin assignment, and connector configuration must be engineered together.
Cable Assembly Configuration
The 5501-2013 is supplied as a factory-molded cable connector plug.One end features the 13-pin connector, while the opposite end provides an open cable termination for connection to customer equipment.The original Burton part-number system identifies cable assembly length through the final suffix.Available customization options may include:
- Cable length
- Cable conductor size
- Ethernet cable construction
- Cable jacket material
- Cable outside diameter
- Conductor identification
- Cable termination
- Customized cable assembly
The exact cable specification should be confirmed before production.
Compatible Connectors and Accessories
5507-2013 – 13-Pin Bulkhead Receptacle
The Burton 5507 Series is a bulkhead connector configuration designed for equipment panel and pressure housing installation.The corresponding Shell Size 20, thirteen-contact receptacle provides male pin contacts for mating with compatible 5501-2013 cable plugs.Dedicated Ethernet and power configurations are also listed in the Burton catalog under the 5507-2013-EXXX designation.
5506-2013 – 13-Pin Flange Receptacle
The Burton 5506 Series is a flange-mount receptacle configuration for subsea equipment installations.The corresponding thirteen-contact configuration can be considered for compatible Shell Size 20 cable plug assemblies.Dedicated Ethernet and power configurations are listed under the 5506-2013-EXXX designation.
55R1-2013 – 13-Pin Right-Angle Cable Plug
The Burton 55R1 Series is designed for applications requiring a 90-degree cable exit.It provides an alternative to the straight 5501-2013 configuration.
55A1-2013 – 13-Pin Attachable Cable Plug
The Burton 55A1 Series is an attachable cable plug configuration designed for customer cable termination.It can be considered when customers need to assemble the connector onto their own cable.
Note: Verify exact part-number availability, contact arrangement, keyway, Ethernet configuration, and mounting dimensions before ordering mating receptacles and accessories.
Typical Applications of 5501-2013
1. Remotely Operated Vehicles (ROVs)
The 5501-2013 provides a thirteen-contact cable connection for ROV electrical systems, tooling, auxiliary equipment, and subsea instrumentation.It can also be configured for Ethernet communication and power transmission through a single cable assembly.
2. Subsea Ethernet Communication
Subsea Ethernet systems require reliable network connections between underwater cameras, control modules, and surface equipment.The dedicated 5500 Series Ethernet configuration supports 1000Base-T network performance.
3. Subsea Umbilical Assemblies
Subsea umbilicals and cable termination systems require reliable electrical connectors for connecting underwater equipment.The 55 Series interface provides an established connector option for compatible cable assemblies.
4. Subsea Control Modules
Subsea control systems may incorporate multiple electrical connections for monitoring, instrumentation, and auxiliary functions.The thirteen-contact configuration can be considered for combined power, control, and data circuits.
5. Underwater Cameras and Video Systems
Underwater cameras and monitoring equipment frequently require both electrical power and communication connections.The Ethernet and power combination provides a practical interface for compatible subsea camera systems.
6. Offshore Inspection Equipment
Offshore inspection systems frequently use subsea cameras, sensors, network devices, and electrical tools.The connector can be integrated into compatible underwater cable assemblies.
7. AUV and Underwater Robotic Systems
Autonomous underwater vehicles and robotic platforms frequently require multiple electrical interfaces for sensors, control systems, and communication equipment.The 5501-2013 provides thirteen contact positions for appropriately designed electrical connections.
8. Subsea Monitoring Networks
Subsea monitoring systems require reliable connections for network communication, sensor signals, and auxiliary power.The dedicated Ethernet and power configuration can simplify cable routing and equipment integration.
Installation and Maintenance Guidelines
Step 1: Inspect the Connector
Inspect the connector shell, contact sockets, molded body, and cable assembly for visible damage.
Step 2: Verify Compatibility
Confirm the Shell Size 20 configuration, contact arrangement, keyway, and mating interface of the receptacle.
Step 3: Check the Contacts
Ensure that all thirteen female socket contacts are clean and free from contamination or mechanical damage.
Step 4: Verify Electrical Continuity
Check the thirteen conductors and verify the approved wiring assignments.
Step 5: Verify Ethernet Wiring
For Ethernet configurations, verify the differential pairs, cable construction, and applicable transmission requirements.
Step 6: Mate the Connector
Follow the manufacturer’s recommended mating procedure and ensure correct mechanical alignment.
Step 7: Secure the Locking Mechanism
Install the appropriate locking ring or retention accessory according to the approved configuration.
Step 8: Perform System Testing
Verify electrical continuity, insulation resistance, Ethernet performance where applicable, and the complete assembly’s pressure qualification before deployment.
Step 9: Maintain After Use
Inspect the connector after recovery and follow the manufacturer’s recommended cleaning and maintenance procedures.
Important: The Burton 5500 Series is a dry-mate connector family. Circuits should be de-energized before mating or unmating. Do not treat this connector as a wet-mate connector.
Quality Control and Testing
Depending on the ordered configuration and project requirements, HYSF SUBSEA quality-control procedures may include:
- Visual inspection
- Dimensional verification
- Contact inspection
- Electrical continuity testing
- Insulation resistance measurement
- Contact resistance measurement
- Cable identification checks
- Ethernet continuity and performance testing
- Mating compatibility verification
- Mechanical inspection
- Hydrostatic pressure testing
For Ethernet configurations, additional testing may include:
- Differential pair continuity
- Pair mapping verification
- Network link establishment
- Ethernet transmission testing
- Signal integrity evaluation
The applicable test procedures and acceptance criteria should be established according to the approved connector configuration and intended operating environment.
Frequently Asked Questions
Q1: What is the 5501-2013 underwater connector?
The 5501-2013 is a thirteen-pin straight cable connector plug from the Burton 5500 Series, featuring Shell Size 20 and female socket contacts.
Q2: How many contacts does the 5501-2013 have?
It features thirteen female socket contacts.
Q3: Is the 5501-2013 a male or female connector?
The 5501-2013 cable plug uses female socket contacts. Its compatible receptacle uses male pin contacts.
Q4: What is the shell size?
The connector uses Shell Size 20.
Q5: What is the conductor specification?
The original Burton contact arrangement specifies thirteen 18 AWG conductors for the 2013 configuration.
Q6: What is the standard voltage rating?
The standard Burton 5500 Series voltage rating is 600 V.
Q7: What is the current rating?
The original Burton catalog directs users to its Ampacity appendix rather than assigning a universal current rating to the 2013 contact arrangement.Current capacity must be evaluated according to conductor size, cable construction, operating temperature, and electrical loading.
Q8: What is the pressure rating?
The Burton 5500 Series technical documentation specifies a pressure rating of 10,000 psi, approximately 690 bar.
Q9: Does the 5501-2013 support Ethernet?
Yes, the 13-pin configuration can be used in dedicated Ethernet and power cable assemblies. The original Burton catalog specifies 1000Base-T network performance up to 1 Gbps.The correct Ethernet cable and contact wiring configuration are required.
Q10: What is the maximum Ethernet cable length?
The original Burton catalog specifies Ethernet performance up to 1 Gbps for cable lengths up to 75 meters.
Q11: What is the connector body material?
The standard Burton 5500 Series connector uses an integrally molded elastomer body.
Q12: What is the shell material?
The standard shell material is passivated 316L stainless steel.
Q13: Which connector mates with 5501-2013?
The corresponding bulkhead receptacle is 5507-2013, while 5506-2013 provides a flange-mount option.
Q14: Can the cable length be customized?
Yes. Cable lengths and cable assembly configurations can be specified according to project requirements.
Q15: Is 5501-2013 suitable for ROV applications?
Yes. Its thirteen-contact configuration and Burton 55 Series interface make it suitable for compatible ROV, subsea tooling, and offshore equipment.
Q16: Is the connector wet-mate?
No. The Burton 5500 Series is a dry-mate connector family. It should normally be connected and disconnected in a dry environment.
Q17: Can the 5501-2013 replace an existing Burton connector?
It can be considered as an alternative for compatible Burton 5500 Series installations. Exact shell dimensions, keyway, contact arrangement, and electrical configuration should be verified before replacement.
Why Choose HYSF SUBSEA 5501-2013?
The
HYSF SUBSEA 5501-2013 Burton 55 Series Compatible 13-Pin Straight Cable Plug provides a practical electrical connection solution for demanding subsea applications.Its principal advantages include:
- Burton 55 Series compatible interface
- Shell Size 20 configuration
- Thirteen female socket contacts
- 13 × 18 AWG conductor arrangement
- Straight inline cable plug design
- Integrally molded elastomer connector body
- Passivated 316L stainless steel shell
- High-conductivity copper-alloy contacts
- 600 V standard series voltage rating
- 10,000 psi series pressure rating
- Ethernet and power combination options
- 1000Base-T Ethernet configuration
- Customized cable lengths
- Suitable for ROV and subsea communication applications
For ROV manufacturers, subsea engineering companies, offshore equipment suppliers, and marine research organizations, the 5501-2013 provides a versatile thirteen-contact cable connection solution for compatible Burton 55 Series installations.
