What should I do if the Insulation Resistance (IR) reading is low?
Don’t panic; it’s often just dirt.
How often should I inspect and replace the O-rings?
O-rings are cheap; electronics are expensive.
How should I route the cables to avoid stress?
Strain relief prevents fatigue.
When and why should I use Dummy Plugs?
Think of a Dummy Plug as a “Helmet” for your connector.
How should I clean the connectors after use?
Salt is the enemy of rubber seals.
How do I properly unmate (disconnect) the connectors?
Disconnecting requires patience.
How do I install the Bulkhead (BCR) onto my housing?
The bulkhead interface is the most critical leak path.
How tight should I screw the Locking Sleeve?
Do not confuse the locking sleeve with the sealing mechanism.
How do I properly mate the connectors? (Push, Don’t Twist)
The “Twist” is the #1 killer of subsea connectors.